Gutch
Active member
Anyone running a 220mm front rotor on their fork? How are you finding the braking power of the RSC’s, after bedding?
i would totally try out the 220 if there was an adaptor 160 pm to 220 pm available, any ideas?Anyone running a 220mm front rotor on their fork? How are you finding the braking power of the RSC’s, after bedding?
Formula do one,i would totally try out the 220 if there was an adaptor 160 pm to 220 pm available, any ideas?
What adapter did you use for the rear?I have switched to 220mm sram rotors front and rear with my code rsc brakes. It’s a no brainer, just make the switch. More power. Less hand fatigue. Less fade with the thicker 2.0mm discs. I am not going back to 200mm.
If you have a 160mm Mount then you could combine the 20mm and 40mm adapters. Looks wrong but still works.
I have switched to 220mm sram rotors front and rear with my code rsc brakes. It’s a no brainer, just make the switch. More power. Less hand fatigue. Less fade with the thicker 2.0mm discs. I am not going back to 200mm.
If you have a 160mm Mount then you could combine the 20mm and 40mm adapters. Looks wrong but still works.
I have switched to 220mm sram rotors front and rear with my code rsc brakes. It’s a no brainer, just make the switch. More power. Less hand fatigue. Less fade with the thicker 2.0mm discs. I am not going back to 200mm.
If you have a 160mm Mount then you could combine the 20mm and 40mm adapters. Looks wrong but still works.
The larger you go with a rotor means there's more metres per second going through the brake pads and therefore more heat.
You may need a couple of thin washers to pack the calliper height up to make sure it contacts centrally on to the rotor correctly (You may not need these) Apart from that as long as the 220 rotor is the same thickness as your current rotor you should be good to go.I have 2020 Comp with Sram Guide RE brakes and Lyrik fork, if I want to upgrade to 220mm front rotor will I need only new 220mm rotor and caliper adapter, anything else?
That is why I said you ‘may not’ need these.I thought proper adapter is compensating position of caliper on the rotor ?
I have switched to 220mm sram rotors front and rear with my code rsc brakes. It’s a no brainer, just make the switch. More power. Less hand fatigue. Less fade with the thicker 2.0mm discs. I am not going back to 200mm.
interested as well...@Avyoung - were you able to swap to 220mm Centerline SRAM without any additional adapter? Simple straight-swap?
The World's largest electric mountain bike community.