RAFALE Project > Dengfu E10 + M510 FC2.0 > Frame delivered!

[PH1L1PP3]

Today delivery:
(Next delivery will be the Dopper post then the battery cells)

 

[PH1L1PP3]

I ordered the 16mm spacer and forgot the 32mm

 

[PH1L1PP3]

I was concerned by the fact I do not have a air compressor to set the tires on their rims seat.
I used some dish soap and inflated the wheels with a classic hand pump.
The tires seat just below 2 bar, i inflated to 3 kg. I will check tomorow if they leak.
Finally, the most difficult was to mount the tires on the rims

 

[p3eps]

I was concerned by the fact I do not have a air compressor to set the tires on their rims seat.
I used some dish soap and inflated the wheels with a classic hand pump.
The tires seat just below 2 bar, i inflated to 3 kg. I will check tomorow if they leak.
Finally, the most difficult was to mount the tires on the rims

View attachment 118957

You need to rotate the tyres to that the logos line up with the ones on the wheels!!

Looks like it's all coming together though - bet you can't wait to have it out on the trails!

 

[PH1L1PP3]

You need to rotate the tyres to that the logos line up with the ones on the wheels!!

Looks like it's all coming together though - bet you can't wait to have it out on the trails!

I mount the rear first and did'nt mind the logos. I will redo like the front

 

[PH1L1PP3]

Waiting for some parts, dropper seat post, 32mm spacer, etc.
I checked the motor fit with the wiring.
I found these cells for the battery in Netherland and waiting for too:

Samsung INR21700-50G 4850mAh - 9.7A Clear wrap

1) Fabriqué en Corée du Sud 2) Courant de décharge (max.): 10A / 9.7A 3) Capacité minimale: 4850mAh 4) Tension nominale: 3,63 V 5) tension de coupure de décharge: 2,5 V 6) Méthode de charge: CC-CV 7) Tension de charge: 4.2 V 8) poids: 69,5 g 9) Durée de vie: capacité ≥ 3, 880 mAh @ après 1000...

www.nkon.nl

Manufactured in South Corea, for an abnadonned car project.
Wait and see!

 

[PH1L1PP3]

looks great!! Congrats.

Thanks

 

[Karamba!]

Nice Ride, Congrats!!

 

[PH1L1PP3]

Thanks, but not yet finished. Still waiting delivery for dropper post, little stuff and battery cells.

 

[PH1L1PP3]

Today deliery:
SAMSUNG INR21700-50G

Samsung INR21700-50G 4850mAh - 9.7A Clear wrap

1) Fabriqué en Corée du Sud 2) Courant de décharge (max.): 10A / 9.7A 3) Capacité minimale: 4850mAh 4) Tension nominale: 3,63 V 5) tension de coupure de décharge: 2,5 V 6) Méthode de charge: CC-CV 7) Tension de charge: 4.2 V 8) poids: 69,5 g 9) Durée de vie: capacité ≥ 3, 880 mAh @ après 1000...

www.nkon.nl

Cells support:

TO BE FOLLOWED...

 

[PH1L1PP3]

SAMSUNG DATA SHEET:

 

[PH1L1PP3]

First, charging and balancing the cells:

4 X Cells charger:

https://fr.aliexpress.com/item/1005004802496632.html?spm=a2g0o.productlist.main.5.1a767502cDO1D6&algo_pvid=cf2618af-6888-40b1-8692-041589625b75&aem_p4p_detail=2023070511390510041525531846480001725334&algo_exp_id=cf2618af-6888-40b1-8692-041589625b75-2&pdp_npi=3%40dis%21EUR%2146.27%2122.67%21%21%2149.16%21%21%40211bd4cd16885823456963926d07e8%2112000030544246345%21sea%21FR%212535126407&curPageLogUid=snjEew2344Ot&search_p4p_id=2023070511390510041525531846480001725334_3

 

[PH1L1PP3]

Four first cells still charging after 04:18H

 

[PH1L1PP3]

Nickel plates cuted at the requested dimension:

Nickel:

https://fr.aliexpress.com/item/4001344082865.html?spm=a2g0o.order_list.order_list_main.35.e6a35e5bS3UVPU&gatewayAdapt=glo2fra

Tag weld tool:

https://fr.aliexpress.com/item/1005001895284739.html?spm=a2g0o.order_list.order_list_main.29.e6a35e5bS3UVPU&gatewayAdapt=glo2fra

 

[PH1L1PP3]

Let's go:
Finaly, I forget the supports/spacers to save space and be able to install a smart BMS

 

[BogEyes]

This looks bangin! Making your own battery looks daunting!