Orbea Rise H20 (2023) add sc-en600

[99xracer]

I'm looking to add a sc-en600 display. It came with the sw-en600-l controller with the ep6 motor but I'm struggling to find the parts needed to connect the units to the display. Does anyone know what I need?
Thanks
Ryan

 

[Weeksy]

I've wondered the same as i've got the same bike... I (probably incorrectly) assumed they'd come with a cable to connect into the loom somewhere. But i'm curious as to the answer.

Out of interest, why ?

 

[99xracer]

I've wondered the same as i've got the same bike... I (probably incorrectly) assumed they'd come with a cable to connect into the loom somewhere. But i'm curious as to the answer.

Out of interest, why ?

I've already ordered the computer display but it's going to take a week or two to arrive but from looking at the description it looks like it comes with nothing other than the bar mount. Shimano documentation is non-existent as you may already know.

 

[markloch]

Did you get this sorted? I don’t think you need any additional parts: the cable from the thumb switch is coupled to the cable that runs to the motor at the stem; replace the coupler with the display. Orbea’s Blue Book should have the details (it does for the Urrun).

 

[99xracer]

Did you get this sorted? I don’t think you need any additional parts: the cable from the thumb switch is coupled to the cable that runs to the motor at the stem; replace the coupler with the display. Orbea’s Blue Book should have the details (it does for the Urrun).

Yes I did. I plugged the wire (cable) from the motor into the the new sc-en600 and then purchased a new wire to run from that to the OEM sw-en600 controller. Worked like a champ!

 

[discdigger]

Yes I did. I plugged the wire (cable) from the motor into the the new sc-en600 and then purchased a new wire to run from that to the OEM sw-en600 controller. Worked like a champ!

I'm interested in adding a display as well (kind of ridiculous that my H20 doesn't come with one) where did you purchase the wire that runs from the controller to the display?

 

[markloch]

I'm interested in adding a display as well (kind of ridiculous that my H20 doesn't come with one) where did you purchase the wire that runs from the controller to the display?

You might not need a cable. I’d start by fetching the blue paper for your bike at https://www.orbea.com/us-en/support/manuals/

If yours is like my ’23 Urrun, there will be two cables coupled together at/inside the stem (headset cabling system) one from the switch and one from the motor. The coupler is just a little “torpedo” that connects the two cables. The sc-en600 replaces the coupler. Fish out the cable from the stem, remove the coupler, plug each into the sc-en600 (which has three receptacles for the cables). This might help - it’s from the Urrun’s blue paper. Orbea has the best tech docs I’ve come across:

 

[discdigger]

Hmmmm I have the less expensive, not cable routed thru the headset version, but I was also wondering, if you attach the sc en600 display, does that interfere with / eliminate the Bluetooth connection, to the shimano app, or would you have both ?

 

[markloch]

Still have BT from the thumb switch.

What year? This is from the 2023 rise blue paper.

 

[discdigger]

Thanks, I have 2024 rise H20. I wasn't sure whether to invest in the diplay, if it took away functionality.