faberle
Active member
All is in the title. Have searched the web for a while without success. any Idea ? Thank you.
Orbea Rise derailleur hanger, where to buy ?
- Thread starter faberle
- Start date
Jeffsy29
Member
That looks totally different from the one on Orbea's website:
JensonUSA (USA Rise distributor) sent me here for hanger: DERAILLEUR HANGER STD X12 FS 21 7075
Curiously, I can't seem to add it to my cart...some website glitch.
Has anyone with a Rise bought a spare DHanger?
faberle
Active member
- Thread starter
- #5
Below message received from Orbea customer service two weeks ago.
“The reference number for the DERAILLEUR HANGER STD X12 FS 21 7075 is X1600000.
Unfortunately we don't have it available at the moment, although we will make a change to the stock as soon as we are able to.”
“The reference number for the DERAILLEUR HANGER STD X12 FS 21 7075 is X1600000.
Unfortunately we don't have it available at the moment, although we will make a change to the stock as soon as we are able to.”
Jeffsy29
Member
Bummer - not surprising though. No emergency, we don't even have the bike yet. I just like having one in-hand with any new bike to avoid down-time. Cheap insurance.
I've had Specialized dealers using fear-tactics to steer me aware from Orbea, especially warranty issues, replacement parts availability, Support, etc. Hopefully it's not as bad as they make it out to be given their Levo SL is being challenged hard with the Rise.
PILO D797 CNC gear mech hanger / derailleur hanger | eBay
PILO have looked at the OEM original hanger and redesigned a more durable retention system for the fitting. To fit the following models -. 2020 - 2021 onwards Wild FS Hydro and Carbon.
www.ebay.co.uk
Ducman71
Member
From Orbea. Same hanger as Occam.
DERAILLEUR HANGER STD X12 FS 21 7075
The washer for hanger and the non-drive side bolt here is the link:
HARDWARE KIT REAR AXLE F. SUSP 20
Hanger from Pilo seller:
Pilo D797 Derailleur hanger for Orbea Occam, Orbea Rise, Orbea Wild fs Hydro and Carbon 2020 2021+ - Elanus Parts
DERAILLEUR HANGER STD X12 FS 21 7075
The washer for hanger and the non-drive side bolt here is the link:
HARDWARE KIT REAR AXLE F. SUSP 20
Hanger from Pilo seller:
Pilo D797 Derailleur hanger for Orbea Occam, Orbea Rise, Orbea Wild fs Hydro and Carbon 2020 2021+ - Elanus Parts
Damned expensive options compared to the £15 for the Orbea one.
The spares they offer are useful and well priced in most cases. But damn that range extender cable is expensive.....£80!!! One of the retention tabs has broken off one of ours already. I thought I'd just pick up another but not at that price...
The spares they offer are useful and well priced in most cases. But damn that range extender cable is expensive.....£80!!! One of the retention tabs has broken off one of ours already. I thought I'd just pick up another but not at that price...
Jeffsy29
Member
@crencos - Wait....so do you need both parts then? i.e. REF. X1600000 + REF X2030000?
If so, that brings the cost a little more in line with what you see for sale on other sites. (like North Shore's one)
If so, that brings the cost a little more in line with what you see for sale on other sites. (like North Shore's one)
No - you can reuse the nut bit
You´re correct. I just posted the two links if someone need the nut.
I broke the plastic part of my nut but it works fine.
Pilo Engineering
RickBullotta
E*POWAH Elite World Champion
A plastic hanger won't last a ride, and 3D printing metal is absurdly expensive when including amortized machine time and cost.
faberle
Active member
- Thread starter
- #17
After 5 weeks of wait, I finally got one (Orbea x1600000) delivered from veloboutiquepro. See comparison between the one I ordered from Pilo and the Orbea one.
Last edited:
What do you think of them both?
I've replaced one on my bike (and bent the one on there back straight and kept it for an emergency). Orbea one seemed to bend really easily (but that meant the XT mech was completely fine - I'd rather replace a £20 mech hanger than a £100 mech)
I've been using the Pilo one since early September, I managed to loose the bike in a ditch hidden by bracken and had to adjust the rear mech a little to carry on but that's been the only time I've had a problem so far.
I changed it as I was fairly certain the original was bent from new and I dont have the tool for checking the alignment.
I changed it as I was fairly certain the original was bent from new and I dont have the tool for checking the alignment.
Killswitch73
Well-known member
seem so
seems someone has bought them all to make a quick buck ..
need a spare for my new rise that arrived 2 days ago .
seems someone has bought them all to make a quick buck ..
need a spare for my new rise that arrived 2 days ago .
More expensive option, but excellent insurance and available. I keep one in my pack
Orbea Occam 2020+ Derailleur Hanger
Derailleur hangers for the new Orbea Occam 2020 are now available. Made in Canada and shipped worldwide. Shop now.
northshorebillet.com
Thanks… but was looking for the OEM.More expensive option, but excellent insurance and available. I keep one in my pack
Orbea Occam 2020+ Derailleur Hanger
Derailleur hangers for the new Orbea Occam 2020 are now available. Made in Canada and shipped worldwide. Shop now.
morninseal
New Member
They're available for the Rise with 10/6-10/10 estimated date. REF.: X1600000REAR DERAILLEUR HANGER Nº50 X12 MTB STD, used my barcode / serial number to find in Gear > Spare Parts, $18 + $12 shipping to US.
FYI- I got these from bikebling.com, within 3days of ordering. I ordered one from Orbea 3 days ago and it still hasn’t shipped., likely a 10 day turnaround. They are very slow, thus the reason for alternative locations search from my end.
Similar threads
EMTB Forums
Latest articles
-
Santa Cruz Vala X0 review - a new approach to perfection?
The new Vala is Santa Cruz’ first attempt on a Bosch-powered emtb. Like...- Knut Nes
- 6 min read
- Views: 706
- Reaction score: 3
- Comments: 2
-
A new standard for charging ebikes is coming? A quick interview with Bosch - charge2bike
I had a quick chat with dr Vikram Godbole about "charge2bike", a new...- Knut Nes
- 2 min read
- Views: 820
- Reaction score: 7
- Comments: 4