Magura MDR-P 220mm Rotors

[fairbank373]

Evening All,

First post and new to the EMTB world, I have a 2019 Cube Stereo 160 Action Team with Shimano Saint brakes as standard and wanted to upgrade the rotors to the Magura 220mm, i have the Fox factory 36 forks in which i believe accept 180mm rotors when caliper is fixed to the forks? (please correct me if im wrong) and therefore currently have an adapter to accept the 203mm standard rotors, size i don't know.

Could i please have some advice or someone point me in the right direction of the adapters i would need to accept the 220mm Magura rotors, front and rear?

Any help would be much appreciated.

 

[R120]

Some info that might help here. I have 223mm Galfers on my bike

SRAM 220mm Rotor - EMTB Forums

 

[deksawyer]

You need the Magura QM45 adapter for the 220mm rotor, but I'd only fit this to the front, way overkill and completely unnecessary on the back.

I went for the Galfer 223mm kit up front as well. Comes with all bolts required.

 

[salko]

IMHO even 200mm will be overkill on the rear, will get locked-up very easily with powerful brakes like Saints ...

 

[fairbank373]

Thanks for the info, much appreciated and i will take note with the rears