Levo bike stand.

[jsalas2]

will a Scorpion bike work with a Levo.

 

[Kiwi in Wales]

Nope, sorry.
You need something similar to this stand but for some reason the shop in Italy does not sell them anymore

 

[118]

Nope, sorry.
You need something similar to this stand but for some reason the shop in Italy does not sell them anymore

 

[Simoto123]

I make this stand by ABBA bike stands work.

 

[z1ppy]

I like this the look of this a lot, but quite expensive

StandUp - MTB stand and protection for e-mtb bikes

Previous post with lots of info

 

[jsalas2]

Thank you for the info.

 

[Howz]

I make this stand by ABBA bike stands work. View attachment 22497

I have one of these as well, brand new on eBay £15 delivered

 

[2wheeledwalbert]

I have one of these as well, brand new on eBay £15 delivered

Got a link for that?.

 

[Howz]

Got a link for that?.

Has gone up a few quid:

abba Bicycle Stand, Road Bike, Mountain Bike, BMX, Cycling, Workstand | eBay

 

[2wheeledwalbert]

Has gone up a few quid:

abba Bicycle Stand, Road Bike, Mountain Bike, BMX, Cycling, Workstand | eBay

Cheers ? can you rotate cranks whilst it's on there?

 

[Simoto123]

Cheers ? can you rotate cranks whilst it's on there?

yes once centralised they rotate normally.

 

[GDAS]

Cheers ? can you rotate cranks whilst it's on there?

I'm running Miranda 152 cranks on my 2017 Levo, these result in a slightly wider Q-factor than stock, meaning that the pedals foul the sides of the stand. And unfortunately the seller won't accept returns - PM me if you're interested in a deal!

Although it's in a different price league (about £80), I think the FJM stainless steel stand FJM Custom Bike Stands looks the business. Being single-sided, you can rotate the opposite side crank without any restriction

 

[2wheeledwalbert]

I'm running Miranda 152 cranks on my 2017 Levo, these result in a slightly wider Q-factor than stock, meaning that the pedals foul the sides of the stand. And unfortunately the seller won't accept returns - PM me if you're interested in a deal!

Although it's in a different price league (about £80), I think the FJM stainless steel stand FJM Custom Bike Stands looks the business. Being single-sided, you can rotate the opposite side crank without any restriction

Ah bugger, I ordered one last night. I got hope crank arms on my 18 levo. I'll see how it gets on ?

 

[Chris6]

I'm running Miranda 152 cranks on my 2017 Levo, these result in a slightly wider Q-factor than stock, meaning that the pedals foul the sides of the stand. And unfortunately the seller won't accept returns - PM me if you're interested in a deal!

Although it's in a different price league (about £80), I think the FJM stainless steel stand FJM Custom Bike Stands looks the business. Being single-sided, you can rotate the opposite side crank without any restriction

 

[Chris6]

I tried my Levo on the FJM stand at their workshop a few months ago found too flimsy for the weight of an e bike . Nicely made but really only for non E bike. Made my own in the end , basic but functional.

 

[Will Hesch]

I tried my Levo on the FJM stand at their workshop a few months ago found too flimsy for the weight of an e bike . Nicely made but really only for non E bike. Made my own in the end , basic but functional.

I love mine. I purchased the stainless folding model and it handles my 2019 Levo nicely.

 

[z1ppy]

I tried my Levo on the FJM stand at their workshop a few months ago found too flimsy for the weight of an e bike . Nicely made but really only for non E bike. Made my own in the end , basic but functional.

Which model did you try? The Mk1 or 2 like Will’s? As I like the look of it a lot

 

[MTBGUY65]

I love mine. I purchased the stainless folding model and it handles my 2019 Levo nicely.

View attachment 22652

Where did you get your stand? I have that same bike and I really would like to find something like that.

 

[Chris6]

Which model did you try? The Mk1 or 2 like Will’s? As I like the look of it a lot

Not the mk2 version

 

[Flatslide]

I made this stand for my Altitude, which has a bolt up axle. It's supported on a 5mm stainless bar with a plastic spacer each side.

 

[z1ppy]

Where did you get your stand? I have that same bike and I really would like to find something like that.

The firm seemingly sell via a Facebook page
FJM Custom Bike Stands
But also have these contact details:
07967 441732

[email protected]

 

[Niklas]

One more on this one, love it!

FJM Custom Bike Stands

 

[pavelmatic]

One more on this one, love it!

FJM Custom Bike Stands

Any chance to contact them without Fakebook? (email, etc.)

 

[z1ppy]

@pavelmatic, err... maybe use the email or phone number from my post above?

 

[Will Hesch]

Which model did you try? The Mk1 or 2 like Will’s? As I like the look of it a lot

I contacted them through their Facebook page here:
FJM Custom Bike Stands

 

[Will Hesch]

Where did you get your stand? I have that same bike and I really would like to find something like that.

FJM Custom Bike Stands

 

[pavelmatic]

@pavelmatic, err... maybe use the email or phone number from my post above?

Wow... I somehow overlooked your post. Sorry and thanks for that. ?

 

[Dougygiro]

Hi, sorry if this is a dumb question............. but when using these through crank stands i presume they use a 8mm steel pin, so when turning the cranks (for chain lubing etc) its turning metal on metal. (Pic attached is the FJM one, where you get a pin option when buying)

Or am i missing something!?

 

[z1ppy]

@Dougygiro Nope, that seems about right.. as I could hear the metal on metal when trying out my new one. The shaft did come with a 'bushing' ala the top fitting (for HT2 cranks) but it wasn't going to fit into my 2019 Levo crank, maybe it fit into the earlier Levo's?

I was a little concerned about the metal on metal when I first heard it ,but for the amount it will be used like that, I can't see it doing any damage. The ability to wash the bike standing up with a rear wheel free to turn, is so useful, I can live with this 'issue'

 

[Webike]

Hi, sorry if this is a dumb question............. but when using these through crank stands i presume they use a 8mm steel pin, so when turning the cranks (for chain lubing etc) its turning metal on metal. (Pic attached is the FJM one, where you get a pin option when buying)

Perhaps a quick shot of dry lube would suffice and not attract grit later. Nice stand.