Is there a y problema with motor if I turn off conplety the motor on descents?

[localone]

Is there a y problema with motor if I turn off conplety the motor 5 or 6 times per ride? I usually go down with no asistance, turning off the bike

 

[Shark58]

Do you really mean system off?

This will leave you without any display function, the mileage will not be recorded and there is a slight delay when powering up again.

Why don’t you just switch to the OFF mode?

 

[localone]

Do you really mean system off?

This will leave you without any display function, the mileage will not be recorded and there is a slight delay when powering up again.

Why don’t you just switch to the OFF mode?

Yes, totally off.

Well, I like to feel the gravity Downhill without asistance. Less mileage too is better to replace the bike on the future…

I am asking because I have 2 errors:

1. Only when I Push the miniremote, I supose is because of the battery (7%).

2. 4 times on route I have error: sensor Torque error , reboot the system.
Error 510005

Maybe are relation to ride in off?

 

[steve_sordy]

@localone If you are going downhill and not pedalling, the motor does not assist you anyway. But if you came to an uphill bit and you couldn't carry the speed, if you had left the motor on, then it would be immediately available. Less drama, more fun.

With my first emtb, I played around with switching the pedal assistance to off (not the whole thing). My objective was to preserve battery energy. I quickly decided that it was more hassle than it was worth.