MrMarzocchi
Active member
Just wondering if you ran into any issues? I got given 2 hope rotors for christmas but want Magura MT7 brakes, don't want to have to sell these rotors second hand an buy new MT7 rotors too...
Has anyone fitted MT7 brakes to Hope Floating Rotors?
MrMarzocchi
Active member
- Thread starter
- #3
Good stuff
will have to get some did you have to do any filing?
MrSimmo
E*POWAH Elite World Champion
The rotors are very similar in thickness (2mm for Magura MDR-P and 2.3mm for Hope Floating Rotors).
I tried a Hope rotor in my mt5 (same as mt7) caliper - it fitted fine, brake levers had slightly less leverage/movement but other than that they worked fine
Uberbike ematrix pads
I tried a Hope rotor in my mt5 (same as mt7) caliper - it fitted fine, brake levers had slightly less leverage/movement but other than that they worked fine
Uberbike ematrix pads
Good stuff
Nope, no filing. although from memory the bobbins are pretty damn close to the spacers. No contact whatsoever though, at least on my bike.
I think you will find it's the other way round...? Actually, I thought the Hopes were 1.8mm...
MrSimmo
E*POWAH Elite World Champion
MrMarzocchi
Active member
- Thread starter
- #9
I'm stuck between them and Hope Tech 3 ATM. Did like the feel of the MT5 I felt the other day...have to post a pic of yours if you get chance
MrSimmo
E*POWAH Elite World Champion
Rumour is the Tech 4 has the same power as the Maguras but better modulation… but I cant find anyone thats tested them yet 
...have to post a pic of yours if you get chance
Of the discs/calipers?
MrMarzocchi
Active member
- Thread starter
- #12
Yeah mate
MrMarzocchi
Active member
- Thread starter
- #13
I don't like the look of the tech 4Rumour is the Tech 4 has the same power as the Maguras but better modulation… but I cant find anyone thats tested them yet
MrMarzocchi
Active member
- Thread starter
- #14
I've seen reviews on them but you can't really judge them. Not been out that long have they? Should be good. Guy at shop said Hope wouldn't release a product that's worse than their lastRumour is the Tech 4 has the same power as the Maguras but better modulation… but I cant find anyone thats tested them yet
MrSimmo
E*POWAH Elite World Champion
Shitty quality but this is the best I can do at the moment as I've cropped them from a larger pic
MrMarzocchi
Active member
- Thread starter
- #17
Stunning
you got the blue caps too to match. I love thatIdiot. I just realised I put clearer pics on my review thread shortly after I fitted them:
Haibike AllMtn 3.0 2020 initial review - EMTB Forums
Haibike AllMtn 3.0 2020 initial review - EMTB Forums
Did anyone get to the bottom of the thickness of a hope floating rotor?
I can't find anything concrete online to confirm.
I want 2mm minimum, not 1.8mm.
I can't find anything concrete online to confirm.
I want 2mm minimum, not 1.8mm.
That's excellent thank you.
I'll get a 203 and 220 ordered. They are both below 1.5mm currently.
Although this is at odds with the reply I've just got back from hope saying their floating rotors are 1.8mm.
Cheers for that. I'm really struggling to decide on suitable rotors.
I want a 203 and a 220 ideally min 2mm thickness due to the hope v4 being designed to take their 3mm vented. I don't like how much piston is exposed with thinner rotors.
Unfortunately aesthetics come into it and I don't like the look of the hope 2.3 solid rotor and the magura floaters I own float a bit to much after 6 months
Think it may end up being galfer but with a new mount as theirs are 223mm.
I want a 203 and a 220 ideally min 2mm thickness due to the hope v4 being designed to take their 3mm vented. I don't like how much piston is exposed with thinner rotors.
Unfortunately aesthetics come into it and I don't like the look of the hope 2.3 solid rotor and the magura floaters I own float a bit to much after 6 months
Think it may end up being galfer but with a new mount as theirs are 223mm.
This doesn’t make any sense, there seems to be contradictory info out there on the Version 4 Hope rotors. According to Hope these new rotors are specifically designed for ebikes and as such are supposed to be 2.3mm thick. Having said that the version 4 full floating are…1.8 !? 
Where is the confusion?
floaters - 1.8mm
vented - 3mm
fixed heavy duty rotors - 2.3mm
fixed rotors - no idea 1.8 or 2mm maybe?
The main problem is hope not publicising the rotor thickness of any rotor bar the heavy duty one
floaters - 1.8mm
vented - 3mm
fixed heavy duty rotors - 2.3mm
fixed rotors - no idea 1.8 or 2mm maybe?
The main problem is hope not publicising the rotor thickness of any rotor bar the heavy duty one
Where is the confusion you ask ?! I have never dealt with a company like Hope. Something that every single other rotor manufacturer clearly states, Hope seems to be lost in.Where is the confusion?
floaters - 1.8mm
vented - 3mm
fixed heavy duty rotors - 2.3mm
fixed rotors - no idea 1.8 or 2mm maybe?
The main problem is hope not publicising the rotor thickness of any rotor bar the heavy duty one
How is this for more confusion:
Directly from Hope
“ The vented discs are 3.4mm thick and suitable for the V4 caliper only, these are available in 203mm or 220mm.
Part number for a 203mm vented disc in black is HBSP4342036VN “
This is clear as mud, I guess I won’t be purchasing ANYTHING from these incompetent idiots.
I've still no idea what you are confused about.
Regardless, plenty of other manufacturers to choose from.
Regardless, plenty of other manufacturers to choose from.
EMTB Forums
Latest articles
-
Santa Cruz Vala X0 review - a new approach to perfection?
The new Vala is Santa Cruz’ first attempt on a Bosch-powered emtb. Like...- Knut Nes
- 6 min read
- Views: 3K
- Reaction score: 5
- Comments: 9
-
A new standard for charging ebikes is coming? A quick interview with Bosch - charge2bike
I had a quick chat with dr Vikram Godbole about "charge2bike", a new...- Knut Nes
- 2 min read
- Views: 1K
- Reaction score: 7
- Comments: 5