Front chain ring 2018 levo

[nickthebee]

Hi anyone know the answer i have the standard front ring on whats the best to change it to for a bit more power would it be a 36 any one know what product

 

[nickthebee]

Sram X-Sync 36t 11spd Chainring 94bcd will this fir a levo 2018

 

[khorn]

Sram X-Sync 36t 11spd Chainring 94bcd will this fir a levo 2018

No, you will need a ring with BCD 104.

Karsten

 

[nickthebee]

No, you will need a ring with BCD 104.

Karsten

what would you fit

 

[khorn]

what would you fit

I would fit a steel chainring for a start, if you are running out of gears on the fast bits I would go for 36t. Praxis sells them and that will be my next(running alu now and can’t recommend that)

Karsten

 

[nickthebee]

I would fit a steel chainring for a start, if you are running out of gears on the fast bits I would go for 36t. Praxis sells them and that will be my next(running alu now and can’t recommend that)

Karsten

MTB 1x 104BCD Wave Tech Chainring


what do you think

 

[khorn]

MTB 1x 104BCD Wave Tech Chainring


what do you think

It will fit but it will not last very long, I have a Renthal and it is almost dead after 600 km. Alu is simply too soft when you together with motor put that much power down. If you go for that ring you also need to buy bolts and nuts and the nuts need to be as short as possible.

Karsten

 

[nickthebee]

It will fit but it will not last very long, I have a Renthal and it is almost dead after 600 km. Alu is simply too soft when you together with motor put that much power down. If you go for that ring you also need to buy bolts and nuts and the nuts need to be as short as possible.

Karsten

so the best one is the steel one do you have a link for that pls im not that good on the pc

 

[khorn]

This one I would recommend:
eRING STEEL MTN 1X 104BCD - Praxis Works

Karsten

 

[nickthebee]

so the best one is the steel one do you have a link for that pls im not that good on the pc

that's fab thanks so much for the advise

 

[Perry01]

Do you have to add chain links when moving up to a 36T chainring?

 

[khorn]

Do you have to add chain links when moving up to a 36T chainring?

My best guess is no if you stick to the 11-42 cassette. I went 11-46 when I changed the chainring to 36 and I had to add 2 links over the stock 116.

Karsten

 

[outerlimits]

Worth tooth Stainless steel ring fitted up using 6.5mm chainring bolts ?