Frame integrated system controller + mini remote + Kiox?

[wenna]

On bikes that come with the system controller integrated in the top tube and the wireless mini remote - is it possible to add the Kiox display?

 

[Shark58]

According to the product compatibility map from the Bosch website this can be done.

You will need the Kiox 300 upgrade kit which includes the necessary cable to connect the Kiox 300 display with your drive unit. After installation you can change display screens with the mini remote.

The Smart System Product Combinations - Bosch eBike Systems

Which eBike motor goes with which battery, which app matches which display? The overview of product combinations indicates the compatibilities between all Bosch eBike components in the Smart System.

www.bosch-ebike.com

 

[Plummet]

Yes. It's a standard option on the Voima.

 

[wenna]

Yes. It's a standard option on the Voima.

Have you seen it live?
Where do you connect the display to? From the pictures I´ve seen there´s only one connector on the system controller that connects to the motor, and the mini remote has no connectors.

 

[Plummet]

Have you seen it live?
Where do you connect the display to? From the pictures I´ve seen there´s only one connector on the system controller that connects to the motor, and the mini remote has no connectors.

I have the mini remote. Didn't opt for the display.

The remote is indeed wireless.

 

[Shark58]

Have you seen it live?
Where do you connect the display to? From the pictures I´ve seen there´s only one connector on the system controller that connects to the motor, and the mini remote has no connectors.

You have to connect the system controller and Kiox 300 the same way the LED remote and Kiox 300 are connected.

One cable goes from the motor to the Kiox 300. A second cable goes from the Kiox 300 to the system controller.

 

[manu.w]

Yes it can
Just need a kiox 300 holder and an additional cable.

 

[wenna]

You have to connect the system controller and Kiox 300 the same way the LED remote and Kiox 300 are connected.

One cable goes from the motor to the Kiox 300. A second cable goes from the Kiox 300 to the system controller.

D'oh... I feel dumb now I didn´t think of that.
Thank you.

 

[tresorier21000]

Voici quelques solutions !
VTT-12V - Montages

 

[vls]

D'oh... I feel dumb now I didn´t think of that.
Thank you.

1. You have to unscrew the only screw on the Smart Controller and take out the Smart Controller
2. Then disconnect the cable that goes to the smart controller from the Bosch system and pull this cable through the upper part where the seatpost cable come out of the frame ( be careful not to let it fall into the frame)
3. Then connect the cable from the Bosch system (frame) to the Kiox 300 input
4. Connect the second short cable (from the Kiox Kit) to the output from the Kiox 300, push it through the upper frame tube and connect it to the System Controller
5. Insert the System Controller back into the frame and screw it