Cube Stereo Bash Guard - Protect EMTB

[Another One]

Hi All just received this in the post and wanted to know if anyone has used this product by PROTECT EMTB.

Thanks

 

[slavio]

does it fit the new 2022 Cube frame?

 

[Another One]

Best to check with the retailer I have 2021.

Pardon our interruption...

 

[slavio]

Thanks! According to the info from the link you provided: "CUBE STEREO HYBRID 140/160 500 & 625 WATT 2020/2021/2022 MODELS . WILL NOT FIT THE 2022 750 WATT MODEL. "

That would mean it only fits 2022 frames which are based on the 2021 frames (small sizes, and Race version)

 

[Another One]

Thanks! According to the info from the link you provided: "CUBE STEREO HYBRID 140/160 500 & 625 WATT 2020/2021/2022 MODELS . WILL NOT FIT THE 2022 750 WATT MODEL. "

That would mean it only fits 2022 frames which are based on the 2021 frames (small sizes, and Race version)

As I said I have no idea only interested in my current model.

 

[Clean]

I wrote to the Manufacturer and enquired about a version that fits the 2022 750 spec bikes; one is being designed as we speak, but is not yet available.

I asked him to let me know once it was available for purchase, so can pop something here once I hear.

 

[Another One]

I will say when received mine I did not think it was worth the money but after fitting and use I really am ok with it and it is not even noticeable once fittted.

 

[Stu]

Purchased this for mine and a little unsure of it. Yes it is protection however is fitted with the 2 bolts and then Velcro at the back. Time will tell if the Velcro holds up.

 

[Jeffw]

Just had my 2022 160 delivered, with the 750w battery

My 2020 160 has a 'standup' metal plate to protect the motor cover. Used because the plastic plate shattered on my first ride on the bike

But not at all sure where a plate will fit over this. Securing a new plate with velcro not a viable option

 

[simonwwfc]

I’ve also asked he said 4 week wait yet nothing for 2022

 

[Nick314]

I’ve also asked he said 4 week wait yet nothing for 2022

I had one of these but sent it back as it seemed to sit below the cover just enough to make the clearance feel even tighter. some of the route are rocky here though, so maybe ok on trails.

 

[Morton027]

I’ve been told recently these will be available for 750W models in early October. We’ll see if that comes about.

 

[BeBiker]

On the facebook in one of the many Cube Hybrid 140/160 groups, some guy makes them in small series for the Cube2022, looks good and reviews are good.

 

[simonwwfc]

Just seen a company abroad charging €101 joke

 

[Trom]

I asked the company via e-mail about this, never recieved a reply, however as an interim made one from Kydex sheet, ( 3mm thick) appx £5 bougth on e-bay, simply measure up the base plate, cut a template with a jigsaw, place into the oven on a tray to allow you to place over the cover with the bike upside down, and then mold to shape by hand using leather gloves until it cools down, then stuck on with Gorrila double sided tape, so far stayed in place, been on 2 years on my previous bike.
T

 

[Nick314]

I asked the company via e-mail about this, never recieved a reply, however as an interim made one from Kydex sheet, ( 3mm thick) appx £5 bougth on e-bay, simply measure up the base plate, cut a template with a jigsaw, place into the oven on a tray to allow you to place over the cover with the bike upside down, and then mold to shape by hand using leather gloves until it cools down, then stuck on with Gorrila double sided tape, so far stayed in place, been on 2 years on my previous bike.
T

I might give that a go. It occurred to me that its fundamentally a straight forward thing.

 

[Jona]

I ordered the AVS one

AVS Engine Stone Guard voor Cube Stereo Hybrid van € 85,99 in plaats van € 109,00

Ontdek een breed assortiment aan producten op www.alltricks.nl

www.alltricks.nl

 

[Morton027]

I ordered the AVS one

AVS Engine Stone Guard voor Cube Stereo Hybrid van € 85,99 in plaats van € 109,00

Ontdek een breed assortiment aan producten op www.alltricks.nl

www.alltricks.nl

Does it fit the 750? Quite a bit costlier but looks well designed.

 

[Clean]

Does it fit the 750? Quite a bit costlier but looks well designed.

Based on the pictures on the website this will not fit the 2022 750s.

 

[Morton027]

I’ve done a bit of research, they have a 2022 750 fit model, only issue is getting one in the UK without being hammered by import fees etc.

 

[Jona]

it replaces also the plastic cover, so if you have broken that one, it is not that much more expensive

 

[Clean]

And here it is:

Click me

I have just ordered one, so will share my thoughts when it lands.

From what I understand, the price is below the threshold (150Eu) for paying any import fees.

 

[slypanda]

It is pretty shameful of the industry not to provide better protection down there in the first place, especially for the cost we pay for these bikes. It's like the want our motors break! Oh wait, this is the age of planned obsolescence, of course that's what they want.

 

[Morton027]

I have received the following email today, so I thought it’d be interesting to see the thoughts of other cube owners on here too:

Hi Nicolas,
Hope all is well. Many thanks for your message.
We do have a guard on test for the 750w. Please see attached. Our original plan was to us the battery push button to secure the front of the guard but we were advised by Cube this would void frame warranty.
Attached does involve drilling two holes in the front of the motor cover , the rear can either be drilled or heavy duty Velcro. Fitting takes about 15 mins and once on is very secure.
We are asking Cube riders for feedback and would really welcome your thoughts, production can start early next week and the hard anodised black ready within 3 weeks for sale.

Enjoy your weekend.
Mike

 

[Morton027]

I ordered the AVS one

AVS Engine Stone Guard voor Cube Stereo Hybrid van € 85,99 in plaats van € 109,00

Ontdek een breed assortiment aan producten op www.alltricks.nl

www.alltricks.nl

Have you received it yet? As good as the price suggests?

 

[Morton027]

And here it is:

Click me

I have just ordered one, so will share my thoughts when it lands.

From what I understand, the price is below the threshold (150Eu) for paying any import fees.

Did you get it yet? Thoughts?