Cover removal

[Binhill1]

Can I remove the cover with the water drain hole in it or is it a big job. I can see the dirt in it apart from poking a few cotton buds in i would like to get cover off if possible. Also any bright ideas as the mud going in from underneath maybe mesh or something

 

[Al Boneta]

You can take the left side motor cover easily.
The crankarm has a self extracting crank bolt. Remove it with an 8mm socket and ratchet. Then remove the 4x3mm Allen screws holding the cover on.

 

[Binhill1]

You can take the left side motor cover easily.
The crankarm has a self extracting crank bolt. Remove it with an 8mm socket and ratchet. Then remove the 4x3mm Allen screws holding the cover on.

It's the other bit I want off the bottom with hole in it where all the mud is at.

 

[McInner1]

The right cover side you can only remove after removal of the motor!

„Removing the iserts also allows taking off the cover...“

 

[Binhill1]

The right cover side you can only remove after removal of the motor!

„Removing the iserts also allows taking off the cover...“

View attachment 18787

Yes was thinking that only 3 months old wouldn't want to mess with it yet . Thanks.