Brose S Mag 2020 rear and head light voltage and current?

[Mako74]

Hi all. I was wondering if someone could tell me what are the max/min voltages and currents coming or can be drawn out from the rear and front light sockets in the motor compartment (see ports #2 and #3 in the image below)? I thought I saw this info in some thread here but can't find it now.

 

[salko]

Front is 12V@2A.

 

[Mako74]

Anyone for the rear light V & A?

 

[SRB22]

Just had an email conversation with Brose about that... their answers:

- Front light is 12V@2A
- Rear light is [email protected]

I know the question is already a bit old, so maybe the answer won't help you... but it still might help someone landing here from a search engine looking for this information (like I did before contacting Brose).

 

[Sturestigarn]

Just had an email conversation with Brose about that... their answers:

- Front light is 12V@2A
- Rear light is [email protected]

I know the question is already a bit old, so maybe the answer won't help you... but it still might help someone landing here from a search engine looking for this information (like I did before contacting Brose).

Is this true for the 2.2 motor as well?

 

[salko]

Yes, it's the same motor...

 

[Sturestigarn]

Yes, it's the same motor...

Great. Then I'll go ahead and order the Lupine-connector and try to connect it to my Outbound Trail Light!

 

[jolaca]

Just had an email conversation with Brose about that... their answers:

- Front light is 12V@2A
- Rear light is [email protected]

I know the question is already a bit old, so maybe the answer won't help you... but it still might help someone landing here from a search engine looking for this information (like I did before contacting Brose).

Thanks a lot!! So that means that for the rear we have 12V·0,1A = 1,2W available. That's a pity because that means we cannot plug there the Garmin varia eRTL615. This radar uses 12V but needs 1,5W according to its manual. If it only had 0,15A available, that would be enough!!