Bosch motor Badge disappeared :-(

[mak]

I have only just realised after cleaning the bike the bosch badge has gone from the motor casing, bit of a pain as the bikes only a few weeks old, are these stuck on and whats the best route of action to get another one, the shop I purchased it from/ Cube or bosch ?

No idea but would like the quickest option cus its pi$%ing me right off now ive noticed it
I've just had a look at a photo of when it was attached, it actually looks like a substantial cover plate and not just a stuck on badge

 

[Gary]

Ask @Rob Hancill for one of these:

 

[Beekeeper]

It’s a weight-saving feature of the new Bosch (much like spent booster rockets) designed to fall away when you exceed 15.5mph

 

[Beekeeper]

£9 on amazon or £5 in most other online retailers

 

[Beekeeper]

I have only just realised after cleaning the bike the bosch badge has gone from the motor casing, bit of a pain as the bikes only a few weeks old, are these stuck on and whats the best route of action to get another one, the shop I purchased it from/ Cube or bosch ?

No idea but would like the quickest option cus its pi$%ing me right off now ive noticed it
I've just had a look at a photo of when it was attached, it actually looks like a substantial cover plate and not just a stuck on badge

Whatever you do, don’t paint the white circle red or the ebike haters will have a target to aim for ?

 

[Akiwi]

I would say something like that should be covered by guarantee

 

[mak]

£9 on amazon or £5 in most other online retailers

View attachment 24145

Ordered one from amazon , had no idea to look there cheers, there is absolutely no glue or tape residue left on the motor casing so i have no idea how this cover was attached.

 

[carlbiker]

Ordered one from amazon , had no idea to look there cheers, there is absolutely no glue or tape residue left on the motor casing so i have no idea how this cover was attached.

Did you suss it out, exactly same happened to me today, I still have the cover but no idea how to ensure it keeps on in future!

 

[Akiwi]

I just noticed, mine is lose too. about to loose it unless I glue it down.

 

[Zimmerframe]

I just noticed, mine is lose too. about to loose it unless I glue it down.

You should have a new custom one made up with a Frog embossed on it !

 

[ggx]

 

[Akiwi]

You should have a new custom one made up with a Frog embossed on it !

 

[Akiwi]

 

[PhilBaker]

Isn't that the Bosch 85nm Torque update? You just take the really heavy badge off and you get an extra 10nm...

 

[Zimmerframe]

View attachment 46538

I think you might be onto something there with some aftermarket customisation ! (I'm thinking probably only for e-bikes though.......)

The Bosadge ?

 

[Akiwi]

Badosch
Badsch
Boschbadge

 

[Zimmerframe]

Badosch
Badsch
Boschbadge

We'll need to spin this off into it's own thread in the Asylum section of the forum ..

Alternating letters :
Badge/Bosch
BASGH
BODCE

Badgsch
MotorTAG
Logo a go go
Ensignia
Boschme
Distintivo

 

[Doomanic]

It’s stuck on with double sided tape. I used black silicone adhesive (like Sikaflex) on my Gen2 and it didn’t fall off again. I haven’t got around to sticking the badge back on my Gen4.

 

[mak]

I just stuck the new one on with some heavy duty double sided tape.

 

[The Hodge]

Unbadged is where its at baby ..keep em guessing as they eat dust ..?
Mine has also disappeared into the great unknown ..

 

[Patchinko]

Me too X 2.

Both mine and the wife's came unstuck.

Luckily at home during washing.

Any suggestions for a good glue to stick em back on with?

 

[GrandPaBrogan]

Stick one of these logos instead... maybe it would peave the company bosses at Bosch enough - that they might confront their logo department to get their act together and get such a simple task done properly... ??

 

[Spanner Monkey]

the original is held on with double sided foam tape, luckily mine came loose when washing the bike so I took it off cleaned it thoroughly and glued it back on with an automotive urethane glue, its going nowhere now.
maybe someone should start printing some replacements with a 3d printer for all those that love a bit of colour coordination on their bikes.

 

[Trip Hazard]

Mine fell off after cleaning my bike at the weekend.

 

[The Hodge]

Hadn't realised that mine had fallen off ..Im replacing it with an understated colour ( color for those over the pond ) co-ordinated little trinket ..

kinda cute methinks...?

 

[Doomanic]

Nice, where did you find that?

 

[Zimmerframe]

Nice, where did you find that?

Isn't this more you ?

 

[Doomanic]

Well, I'm not a gynecologist but I'm always happy to take a look.

 

[The Hodge]

Ebay ..
only one left apparently ..
Sorry had to delete link as it gave out my address!

 

[Doomanic]

Can you share the item number?