JoeBlow
Active member
Is anyone carrying their e bike on a boot mounted rack and if so which one?
Al
Al
@TheBikePilot has a boot rack I think - I replied to your other thread about roof racks.Is anyone carrying their e bike on a boot mounted rack and if so which one?
Al
The problem is that you are covering your number plate and lights and I believe that is illegal. I was hoping for a rack that raised the bike above those areas.I've done some research. By far the best option is the Thule Raceway for 2 bikes. It's sturdy secure and does not have those annoying straps flying around. It's rated at 30kg so, in theory, should take my 22kg Trek. The problem is it also states 15kg/bike so I'm not sure which is the valid limit if I only put one bike on it. It's not cheap so before I part with my hard earned cash it would be nice to listen to others experiences.
Yes I am reluctantly coming to the conclusion that is what I need to continue doing. I have an SUV but maneuvering the bike into the space is still awkward as it is so heavy. I could do with a sheet of rigid plastic to slide it on. I tried trolley wheels but that didn't work. A sheet of tarp helps a little.The racks can take the weight but the components holding the bikes into the rack haven’t been tested/verified for anything above 15kg. So if you have a crash your insurance doesn’t have to pay out. So it’s a risk.
I’m buying an estate car as with the seats down I can get three bikes plus gear inside with wheels off.
I Personally wouldn't put a 24kg eBike hanging rack OR a roofrack, but that's just me.I personally would put a 24kg eBike on a roofrack but that's just me. Lifting that on and off at the end of a ride is going to be a huge pain.
View attachment 34522
I agree. I have dismissed the idea. It's not just the weight of the bike, I honestly do think a Saris Bones 2 would handle the weight of 21 kg with the battery removed. You can fit a sleeve to cover the battery compartment to counter the water ingress issue but it is also the faff of having to extend the car lights and number plate as I don't think it's possible to get the bike high enough to leave these clear.I Personally wouldn't put a 24kg eBike hanging rack OR a roofrack, but that's just me.
I can get my large fat ebike easily into my Ford Focus hatch by taking the wheels off. I store the wheels in wheelbags (EVOC double wheel bags are perfect) to contain the mud and water and making them easier to handle.I agree. I have dismissed the idea. It's not just the weight of the bike, I honestly do think a Saris Bones 2 would handle the weight of 21 kg with the battery removed. You can fit a sleeve to cover the battery compartment to counter the water ingress issue but it is also the faff of having to extend the car lights and number plate as I don't think it's possible to get the bike high enough to leave these clear.
What would be handy to know is if anyone has any handy tips for making getting the bike into the back of the car any easier. Ideally some form of sliding rail arrangement. The best I've come up with is a couple of sheets of plastic tarp used so that one slides/ruckles on top of the other. I've also used a piece of ply to cover the gap that is formed by the joint in the seats that catches the pedals.
Al
Don't buy a car you're proud of if you're doing that. I have a 5er Touring and I've got tyre tracks on the roof lining!I’m buying an estate car as with the seats down I can get three bikes plus gear inside with wheels off.
That depends on what the roof lining is made of. It doesn't wipe off an absorbent surface...Mud wipes off the roof lining
How can I stop my straps coming loose?
I need answers!
Do them up properly, making sure to re-tension them properly once you've loaded the rack up and secured the bike. and then tie the ends in the correct direction so that the buckles can't slip.How can I stop my straps coming loose?
I need answers!
We are having a 1-1/4 receiver installed and going with the Swagman Current. It can handle up to 200 ftlb torque. Total cost less than $1000 CAD.I need a rack for my car but I’m struggling to find one that will be compatible with a BMW 320D (2004) E46. It’s a saloon. Any suggestions would be appreciated ??
Hi. With a Mazda CX-5 SUV, I've found a black plastic boot-liner helpful for sliding Turbo Levo in, with front wheel off.Yes I am reluctantly coming to the conclusion that is what I need to continue doing. I have an SUV but maneuvering the bike into the space is still awkward as it is so heavy. I could do with a sheet of rigid plastic to slide it on. I tried trolley wheels but that didn't work. A sheet of tarp helps a little.
Al
I would never put a rack of any kind on my 2008 M3 hardtop convertible. But I could fit amazing things in the back seat because of the convertible top. Sadly, a Turbo Levo is not on of them.I can’t get a tow bar fitted. The M sports suspension linkages don’t allow for it.
I’ve found some webbing clips that I’m hoping will help, otherwise it’ll be a Berlingo.
I do that. Slide it in on a large thick plastic sheet. Drive side up and the opposite pedal off.I agree. I have dismissed the idea. It's not just the weight of the bike, I honestly do think a Saris Bones 2 would handle the weight of 21 kg with the battery removed. You can fit a sleeve to cover the battery compartment to counter the water ingress issue but it is also the faff of having to extend the car lights and number plate as I don't think it's possible to get the bike high enough to leave these clear.
What would be handy to know is if anyone has any handy tips for making getting the bike into the back of the car any easier. Ideally some form of sliding rail arrangement. The best I've come up with is a couple of sheets of plastic tarp used so that one slides/ruckles on top of the other. I've also used a piece of ply to cover the gap that is formed by the joint in the seats that catches the pedals.
Al
It’s good to dream.Owns fancy Beemer...
actually drives...
The World's largest electric mountain bike community.