Bafang DPC241 on 35mm bars

[Kiwikev]

Seen as there is an issue with the clamp breaking if overtightened or not fitted with care does anyone have one fitted to 35mm bars without any problems - does the clamp fit well or does it need to be bent to accommodate the extra width?

 

[thaeber]

Seen as there is an issue with the clamp breaking if overtightened or not fitted with care does anyone have one fitted to 35mm bars without any problems - does the clamp fit well or does it need to be bent to accommodate the extra width?

My solution, 35 mm doesn’t fit…

 

[AlexRus]

Seen as there is an issue with the clamp breaking if overtightened or not fitted with care does anyone have one fitted to 35mm bars without any problems - does the clamp fit well or does it need to be bent to accommodate the extra width?

there are two versions, there is also for 35mm

DP C240.CAN screen holder by doudoust

For repace brocken screen holder dpc240 for bafang M600 M500For 31.8MM hanger

www.thingiverse.com

 

[Kiwikev]

My solution, 35 mm doesn’t fit…

View attachment 80820

Effective solution = problem solved!

 

[BastR]

there are two versions, there is also for 35mm

DP C240.CAN screen holder by doudoust

For repace brocken screen holder dpc240 for bafang M600 M500For 31.8MM hanger

www.thingiverse.com

Hi
Can't find the 3D file for a 35mm handlbar

Bafang DP C240 CAN Mount Replacements by codyqd

Replacement parts for the Bafang DP C240 CAN LCD and Button Mount.The tolerances are relatively tight so there might have to be some sanding/filing/post-processing.LCD MountRequires original hardware3x M2 screws1x M3 screwand additional hardware:1x M3 Nut/Brass InsertYou will need to use a...

www.thingiverse.com

DP C240.CAN screen holder by doudoust

For repace brocken screen holder dpc240 for bafang M600 M500For 31.8MM hanger

www.thingiverse.com

 

[beej]

I went with this:

Printables

www.printables.com

Does the job (should be pics):

 

[vext]

I had the same issue with different display and here's how I solved it.

Basically I modified this thing I found on Amazon: Spacer Mount

Unscrew the plastic element in the Spacer Mount and discard it. There are "horizontal" screw holes under the plastic. I used those with the stock screws. I bent and drilled a brass strip into the shape depicted. I cut the "toothed" cylinders off the stock plastic brackets and used them as standoffs between the display and the brass piece.

It's tight. Does not move at all. Perfect angle and is adjustable.

Here's the whole bike for reference.

 

[Sloth v37]

My solution, 35 mm doesn’t fit…















































Did you machine this yourself or just retrofit something else? I just changed to 35mm bars and have no way to mount the display... I also don't have access to a 3d printer for the other solutions

 

[thaeber]

I handmade it out of a piece of aluminum…