220m up grade need help ??‍♂️

[Ripping g]

Ive got a 220m front hope disc and hope caliper need to find what post mount I need I have zeb ultimate forks can anyone help I got this post but it’s way too big ??‍

 

[CjP]

You need a + 40 post mount “M”

 

[Ripping g]

You need a + 40 post mount “M”

View attachment 62646

The standard leg mount is for 200m disc so won’t that take it to a 240m cheers

 

[CjP]

The standard mount is for 180 disc I’m pretty sure?

 

[CjP]

Actually I am wrong, 20mm mount “K”

 

[Ripping g]

Actually I am wrong, 20mm mount “K”

View attachment 62649

Cheers all have a look for 1 and try that ??

 

[Slapbassmunky]

I just used another mount exactly the same as on the rear. Zeb's are 200PM and the back is 180PM.

 

[Ripping g]

Any more suggestions cos that don’t fit eva ???‍??‍??‍

 

[R120]

These Shimano mounts are what I am using on my Zebs with 223 Galfer rotors and Guide RE’s

 

[R120]

You could try the seam equivalent given the Hopes are 220mm

SRAM Disc Brake Adapter for 200 mm Rotors

Adapter to use SRAM calipers with 200 mm rotors. Technical Information: Adapter Material: stainless steel Bolt Material: stainless steel Rotor Size: 200 mm Models: front IS to PM: Fork Mount: international standard Caliper Mount: post mount Manufactu

www.bike-components.de

From recollection as I tried a few mounts you need one where the bolts go straight though and it isn’t offset.

 

[Ripping g]

I could try the 1ns you have on and leave a washer or 2 off ??‍

 

[Ripping g]

Think it needs to be a hope mount as I’m using hope calipers there a different shape to shimano

 

[R120]

I tried the hope mount with my guides and it set them way off, but might work for you


Bare in mind I am using Galfer Discs, Shimano adapter and SRAM brakes so a right mix of brands

Hope Brake Mount Adapter

Hope Disc Brake Mount Adapters - Post, IS and Flat Mount Hope Technology CNC machined mounts offer precise fitting to most frames and forks. Key Features: All mounts come with bolts to fit to fork/frame CNC machined aluminium from T6 2014 alloy Rotor sizes from 140mm up to 203mm Available in…

brink.uk

 

[R120]

Transition Patrol LGBT

View Vital MTB member Marciniasz's mountain bike check 'Transition Patrol LGBT'.

www.vitalmtb.com

 

[R120]

I think this member has 220 Hopes both end on his Commencal - maybe message him?

commencal 2021

Perfect! Killer spec and look. Only thing I would change are the white decals. Black would do better. Also on the website the Zeb's decals on the Race are white and the chain is silver. Pitty there's no Meta SX priced between the Ride and Race and on better components than SRAM SX and Guide RE +...

www.emtbforums.com

 

[CjP]

You will need the Hope 20mm ‘K’ post mount as the standard Sram mount wont clear the Hope calliper, it has a different shape.

 

[Smittylube]

I have a trek rail7 came with yari forks. Swapped the Zeb and the 200 rotors I had did not need an adapter as the Yari did. So I had one to fuss with.
I used the shimano adapter r120 shows. I had to file some of it down for the perfect fit.
magura 220 rotors.
Since yours is a brand mix a bolt on might not be available, but fear not. Just get creative.
I probably took off about 2mm for it to fit properly. Slow, test fit, file more, test fit. It is aluminum and quite soft. Take your time. It doesn’t take long.

If you were close I could send you my other stock one I have.

 

[urastus]

I just used another mount exactly the same as on the rear. Zeb's are 200PM and the back is 180PM.

Back of what?

 

[urastus]

There's also the 200 / 203, 220 / 223 difference - I don't know why; you'd have to be aware of what standards you're using. That might be why some here have had to file or play with washers?

 

[Beaker2135]

According to Hope 200 to 220 is mount P
Hope Chart

 

[Ripping g]

You will need the Hope 20mm ‘K’ post mount as the standard Sram mount wont clear the Hope calliper, it has a different shape.

Yes that’s what I’ve tryed like you said wont fit too big and I’ve tryed the 200 to 220 p mount ?

 

[CjP]

Yes that’s what I’ve tryed like you said wont fit too big and I’ve tryed the 200 to 220 p mount ?

Pictures?
Do you mean the disc is too big?

 

[Ripping g]

Pictures?
Do you mean the disc is too big?

The mount puts the caliper too far away from the disc it’s like it’s about 10mm to far off the the disc

 

[CjP]

The mount puts the caliper too far away from the disc it’s like it’s about 10mm to far off the the disc

You have it the right way round yeah?

 

[fenwick458]

The mount puts the caliper too far away from the disc it’s like it’s about 10mm to far off the the disc

pictures would help, you're not making much sense ?‍

 

[R120]

At the risk of stating the obvious have you contacted Hope for advise?

 

[Ripping g]

At the risk of stating the obvious have you contacted Hope for advise?

Ive just spoke to a shop and they said I need a Q 203/220 so all see how that goes ??‍

 

[Slapbassmunky]

Back of what?

I'm not the sharpest sometimes but I don't get the joke?

 

[urastus]

I'm not the sharpest sometimes but I don't get the joke?

No, it was a real question. Different bikes and forks aren't all the same when it comes to brake mounts. For example, not all emtb frames are native 180mm rotors. I imagine 200mm will be the native size for newer emtb?

 

[Smittylube]

That is correct. My Yari stock forks had an adapter to run 200’s and specs stating 200 max rotor size.
I threw on a Zeb and initially had to run the stock rotor with no adapter. Zeb specs 240 max rotor size. I put 220 on when the part arrived, adjusted the stock mount to fit properly.
Those specs should be checked before you change it, but since you are trying to fit a couple mismatched brands some mods might be required. Mine was shimano brakes magura rotor.
Just saying.