Thought I would share this in case anyone else has the same issue, hopefully this helps.
My month old SL expert refused to charge this morning and when I tried powering up from the TCU and there was nothing. I finished the last ride with about 50% charge remaining so it should definitely have powered up.
After a bit of head scratching I decided to pop the TCU out and have a look if there was anything going on there. First thing I noticed was the internals were damp and a bit gritty, also the battery and usb port were exposed, rubber seal was not seated so I gave it a blast of GT85 and cleaned it up, sadly no change.
Next I decided to pull the connectors apart (two cables run from the TCU and they both have connectors) I simply disconnected and reconnected each and BOOM the bike powered up, and is now charging up ready for tomorrow.
My month old SL expert refused to charge this morning and when I tried powering up from the TCU and there was nothing. I finished the last ride with about 50% charge remaining so it should definitely have powered up.
After a bit of head scratching I decided to pop the TCU out and have a look if there was anything going on there. First thing I noticed was the internals were damp and a bit gritty, also the battery and usb port were exposed, rubber seal was not seated so I gave it a blast of GT85 and cleaned it up, sadly no change.
Next I decided to pull the connectors apart (two cables run from the TCU and they both have connectors) I simply disconnected and reconnected each and BOOM the bike powered up, and is now charging up ready for tomorrow.