For chain drop issue, My cef50 i have try several chain.
1. Shimano XTR chain with deckas chainring no chain drop after multi ride but my chain was too short so i have to replace it.
2. SRAM GX with deckas chainring, NOT a single drop but reach 0.6 at 650KM so need to be replace.
3. YBN...
For your error 21 its a very conmen problem, just pull the speed sensor cable out from MOTOR and extention JOIN. I believe your sensor cable has another short cable that act as extension. Just pull both cable out and push it back in. PLEASE take NOTE you speed on the magnet side, there should...
have you try pull out your motor and controller cable from both side and push it back in. It happen to me once and i try a few time and it solve my problem.
Just found this amazing item on AliExpress. Check it out!
MYR995.76 | San-yo3500mAh Bottle EBike Battery 48V 36V 7Ah 10.5Ah 9Ah Electric Bicycle18650 Batteries Pack for Bafang 250W350W500W Motor Kit
https://a.aliexpress.com/_oBGVlfL
U
Unplug all the cable and plug in back again . It's normal where LCD panel does not power up. I usually unplug the LCD section first if can't only remove the motor . Please check your speed sensor has enough room when your shock it's fully compress. I broke my cable before..
As for speed sensor , you need to remove you shock and fully compressed your frame to check if you speed sensor it's long enough on the magnet side. Pls check it else u going to have trouble cable being Snape like ne..
I have try many way to eliminate cable , you can think of if I basically try before. Anyway use the AC insulation hose it's the best n easiest method. Now my bike has no cable sound problem.
Battery 48v 480wh. I basically upgrade my carbon to T800 from standard T700. My bike has most high end parts. Anyway we have few similar setup and some with lower end parts weight around 20.5kg. All using ohln shock. My bike its the lightest in this picture as i weight all my parts before i...
I request szzs to machine it down before paint it. They should know the thickness of the linkage. Originally when full travel to 165mm as on my picture (black frame) the linkage will touch each other once I machine it down there should have enough room for 165mm.
I just got back from megavalanche 2024 race . Those type of trail it's usual ride as I prefer natural trail with root n rock. I don't really jump alot. Wanted to bring my cef50 over but it's too difficult to carry on the plane else definitely will ride my cef50 over my giga 290. My giga been...
I request linda to do some small modifications to my cef50
I requested linda to did some modifications on my cef50 rocker arm and now my frame has no problem travel to 165 , it's even can reach 170mm but there are no shock available to 60mm stroke. .Does frame travel 165mm enough for u?