Search results

  1. D

    Kenevo Gen1 Official 2020 Kenevo Owners Thread

    Thanks, I’ll give a try.
  2. D

    Kenevo Gen1 Official 2020 Kenevo Owners Thread

    Anyone else suffer from persistent seat post/collar creak? I have to clean the seat post and reapply grease to the post, collar and collar bolt every few rides.
  3. D

    Michelin E-Wild separated bead

    Somebody claiming to work for Michelin contacted me and admitted
  4. D

    Michelin E-Wild separated bead

    I’ve had the same problem with the 27.5 x 2.8 rear tyre. Ended up with me having to push the bike for 4 miles in a dark forest, with no lights.
  5. D

    The Official BLEvo Thread

    Firmware versions Display (TCU?) : 26.B.0 (Hardware : A.1.2) Motor : 7.4.1 (Hardware: 02120104090320035088) Battery : 2.4.4 (Hardware : 4.0)
  6. D

    The Official BLEvo Thread

    Thanks for your reply @PaoloBLEvo BLEvo does have a solid green indicator for GPS, Bike and Motor, but most of the time I don’t get power or cadence data. Sometimes in the middle of a ride I start getting the data for a few minutes, but in never lasts. You can see power and cadence suddenly...
  7. D

    Ebike stands?

    Yes. I use mine for whenever I’m cleaning the bike + chain. Very stable.
  8. D

    Ebike stands?

    I have one of these FJM Custom Bike Stand Not cheap, but works well
  9. D

    The Official BLEvo Thread

    I'm having an issue getting smart power working with my Kenevo 2021. Blevo is connected to the Bike and Motor, but I'm not getting any data about my rpm, rider power or motor power. When riding, the Blevo display shows all 3 values as 0 Anyone else come across this? These are the statistics...
  10. D

    Finding trails - I’m in Kent.

    Have a look at Bedgebury forest, that's not too far from you. https://www.boarsonbikes.co.uk/trails/
  11. D

    Rear derailleur issues 2019 Levo Expert (SRAM X1)

    Have you checked your mech hanger? A slightly bent, or twisted, mech hanger will cause these problems.
  12. D

    Noisy Kenevo

    So after a day of riding around swinley I can report the noise is a lot better. It is still there but it’s not as bad as it was. I am spinning at around 100rpm when the noise starts, so I’ve started clicking up through the gears to get rid of the noise
  13. D

    Noisy Kenevo

    Yes, he did have to remove the motor to get to the tensioner screw. I will update this thread tomorrow once I’ve tried the bike out. I now think the noise is only present when the motor gets warm (around 37 C). When I first got to Berkshire Cycles there was no noise, so I took it for a ride to...
  14. D

    Noisy Kenevo

    Thanks for your suggestion, I hadn’t considered the belt might be too tight. I wondered if the belt might be a little loose. I have just come back from Berkshire Cycles where Chris re-tightened every thing on the bike, he also added a liitle more tension to the drive belt. I’ll try the bike...
  15. D

    Noisy Kenevo

    My 2019 Kenevo has started making a horrible whining noise at lowish speeds. The noise only occurs when pedalling in the lower gears, disappears when I pick some speed and start going through the gears. I made a video of the noise by mounting my phone on the handlebars...
  16. D

    The Official BLEvo Thread

    No problem, Thanks for the quick response and the work around.
  17. D

    The Official BLEvo Thread

    I am trying to add battery and level data fields to the map display, but the data fields are not getting saved. Steps to reproduce: Configuration --> Customize Display Within the “Select data fields on top of the map page” I select Data 1 (map): Battery Data 2 (map): Level Press the <...
  18. D

    Hi

    Hi all, I have been reading these forums for a little while now and decided it was time to join. Finally pulled the trigger on a new kenevo this week, still waiting for it to arrive. I haven't ridden a mtb for a while due to injury, so I'm hoping the new purchase, and the lovely people on...
Top