Search results

There are many variables that are unknown in this test such as: which tyres did the bikes run, how strong was the wind and in which direction, was it exactly the same route? Then why is there distance difference? You can't just take a screenshot of some random guy and say that because average...

I don't know if this screenshot proves anything, really. Just ride 2 motors and feel the difference. Bosch is noticeably more powerful when going uphill. M510 is just bogging down. No matter what the lab tests say. In my opinion m510 is still a decent motor with some advantages like easy...

Honestly personally I don't even consider the noise to be such a big issue. As long as it's strong and power delivery more refined.

Agree with a, but b is too far stretched 🙂 I don't think m560 will get it even close to feeling like a emoto. I have a Talaria Sting and any emtb motor including m620 won't be anywhere near that. And the bike is running stock power, so very mild in motorbike terms. I do wish sometimes though...

I had a Bosch bike and honestly m510 falls behind both in uphill torque as well as refined delivery. Which m510 hardware version do you have? From what I heard the 2.0 version is better than the 1.0 but I haven't had the chance to test. At some point I will dump my m510 and debating whether to...

For those who use m560, how does it feel compared to m510? I have an m510 FC 1.0 and I find it struggles uphill comparing to Bosch or even Shimano. When the cadence starts to drop the amount of support is noticeably reduced. Also torque sensing of the motor lacks sensitivity and is glitchy. How...

Yeah, probably should have posted earlier...

My friend's e8000 broke down and as it was out of warranty he took it over to me, to see what could be done. I have previous Bafang motor servicing experience, and I have agreed to check. When I opened the motor it was trashed inside and full of grime. The previous mechanic who replaced...

Looking to sell my E55 frame(size L, Matt black). I bought the frame for a project I had in mind but as time went on I have dropped the idea and hope that someone might find this interesting. The frame comes with a headset, spare bashguard, rear axle, battery box and a few other small bits...

High performance good quality Chinese cheapo 'Enduro' clone frame bike. I am sorry, but your advertising is laughable. These bikes are nowhere near the quality of Sur Ron's, Talarias and their like...

Really hoping to hear first reviews on this motor soon. Also what do you assume is the difference between the 500w and the 750w motor? Different controller or just a different tune?

Does somebody know the exact shock bushings sizes for e55 frame?

Happy to hear you were finally able to resolve it! I imagine the relief you must be feeling now!

A very interesting thread! Happy for all the Innotrace users out there! But also completely convinced against Innotrace. Well, probably won't be able to get one now anyway 😅 Yet there might be a new player(motor) coming soon and it's not the M630.

Check all the pivot points first of all. There might be some play that could cause it. Ask someone to rock the wheel while holding fingers at each pivot point to check for play.

FC 2.0 is rather the hardware version of the controller, so it can't be updated...

14s BMS doesn't emulate 13s voltage. It starts at 58.8 and cut's off at around 45-46v. So the nominal is 52v and if your bike programmed for that then you will have correct SoC. I have the opposite situation. I use 14s battery but the firmware is programmed for 48v. So SoC is not displayed...

Why can't you just re-use your battery box or even just upgrade the BMS on the existing battery? Of course I don't know how well are the cells welded together for pulling 60a from it... As for myself I will go for a battery with no case so that I could fit 14s6p. I think big motor needs a big...

Bloody Innotrace, had so much potential and In the ruined everything due to poor management and greediness. I think offering tunability for extra fee is a really shitty move and a big red flag that speaks about the company...