Hi,
If you’ve got hope cranks on your exe, which model are you using and do you have the part nos
ta
i want to upgrade to 155s and there seem to be a few choices, cheers
Depends on your use I’d say.
for the UK, where cheeky might involve high stiles, 5ft high, narrow kissing gates and various other issues (tall gate and low trees) etc etc I find the levo too heavy, esp when I’m tired and it’s wet (gripping is harder), also I’ve small hands so my manual orange...
Check your cassette for writing on the inside of one the sprocket arms (*I’m in exactly the same boat as you, 9.8xt new from Trek shop, really good price deal, but going thru bike in garage at home found same differences as you), my cassette is shimano deore, (stamped cs m6100 ) and **I think**...
Do you get a tiny flash of a single red light on the tcu and the green charge lights on the battery come on and corretly indicate the charge level And it seems to charge ok off the charger.
if so that. is the same as mine which got fixed by a new battery (to motorj cable - which is surprisingly...
sorry, Trek Exe range question.
im currently on a 700w full power levo , slow xc rider in the Oxfordshire alps (downs type xc) so in summer roughly - off 10-20%ish, eco - 50%ish,, trail 20%ish, boost 10%ish. (More battery in winter as ground softer and tyres much draggier), ranging from 20...
This Might not work (*old motorbike seized screw etc trick), and take care as not much metal on a bicycle. but fyi, Can you punch/chisel (with a sharp punch or small sharp chisel(even flat screwdriver), hitting it in (gently) with a hammer, , create a indent in the outside edge of the bolt...
When you review it could you do some lower cadence testing please, it got marked down for this in the above review, as an older bimbler who needs to lift for stiles/gates etc light weight is great (hopes raised, new Ktm 16.5kg, sx, 400w removable, bosch motors generally repairable) but...
Hi
if you are using an sks mudrocker rear mudguard on a levo does the extender (on the bike side), cover the area at the back of the motor.
I get mud buildup there and it then gets pushed out to the sides over the motor chain guide etc, which isn’t handy when there are gravel chips in it, Of...
I’d have a look at this
Homepage - eBike Motor Centre (Performance Line Bearings), They also did some vids on repairability etc.
some engines are more repairable than others, so it seems
just fyi
Bosch Magnet centerlock, suitable for speed sensor slim, for measuring speed, | eBay, these can be cut and bent.
https://www.bike24.com/p2288178.html, it sort of clamps on to the centrelock ring via 3 grubs, i was sceptical but once properly seated it never fell off (worked on my...
*warning tight arsed uncool/untrendy/unaesthetic but works fine solution.
on my shimano engine Scott e spark battery front loader i got sick of the battery/battery lock etc getting caked so I got a piece of dpc(*other thick plastics etc available), cut it too correct width, gorilla taped it at...
deffo after lightweight mid power, for xc in not too hilly area and will have to be lifted over gates/fences/stiles Etc. hoping that fazua 60/tq motors turn out to be reliable and rebuildable, hoping more bikes with a removable battery+ extender facility come along. Basically something like a...
“
I recently got a little obsessed with understanding how the HPR50 worked
I ended up making a full 3D cad model
Might be interesting to some of you”
wow, awesome,
Had the original espark, which I liked, but I do think Scott over complicate stuff and it seems to be more so on the new bike, I did like twinloc but maybe the lever should be on the stem or a bit more out of the way, hidden shock - *do you have to take the motor out to get the shock out - it...
3200k on map xc routes untouched, used all (south Uk) weather, try to avoid deep puddles and never hosed the engine(brush it with a wet cheap white bendy plastic loo brush , which is my favourite cleaning tool as it can get most places), rest of bike lightly hosed.
@Emailsucks98 -
re the centrelock magnet problem, is this any help ? - Bosch Magnet centerlock, suitable for speed sensor slim, for measuring speed, | eBay
I’ve had a couple of big holes (needed to use my largest worms that are 4mm) and were a fight to fix fail a few months later after the tyre wears, , so from now on it it’s big and was a fight to fix with worms I’ll use a mushroom from the inside when I get home. Since then I’ve now got a stans...