Search results

I got the bike to turn on after removing bolt 22 and using an allen key I manged to push the battery button, and the display came on, used the + button to change the mode and the motor works. Turned it off using the power button on the frame, AND it won't come on again, unless I remove bolt 22...

Here is the reply from Commencal. I will give it a go tonight....

The light was flashing whilst charging the battery off the bike, and after 6 or 7 hours the green light stayed on. Disconnected charger and the green light went off. Connect charger again and the green light stays on (no flashing). If i press the button on the battery if blinks green and goes...

Hi, On the display, does the cable from the +/- shifter connect to the first port (closest to the frame/head tube), and the other to the second, with 3 and 4 blanked??

Yes, it was unplugged, plugged it in right from the start.

There was a loose connector for the display, but I connected it to the only unblanked plug. I have tried the two conectors the other way around too, but nothing. Also the connector to the motor was off, so i plugged that in too (can only fit one way). I really don't understand why it won't...

Just got a new metapower sx 2020 and have charged the batter for 6-7 hours until the green light stayed on. Fitted the battery and connected the motor connector. Then tried the side power switch but nothing... There is nothing in the manual about switching it on, so have i missed something??

Sorry... i meant de-restrict Just read about the ST Unlocker which looks good..

Hi, new to eMTB (have an old Commencal Meta) and have just placed an order for a new Meta Power :) Anyone one here de-restricting the E8000 whilst retaining the correct speed readings?