Search results

From my experience no. Rob had 46 cassette and it was already a bit short, I tried on 50 and id did not fit.

I make now short rides every day and I can also say that assist level 1 is strong. It does not help to switch to 0-9 since 1 is always the same 250 to 300W. If someone finds a solution to make it less powerful (for long rides or if you riding with a pall that has 250W motor) please share this...

No - I don't think that I need it. I tried it yesterday and it works - but no need for it.

I did not try but perhaps if you change to 9 level instead of 5 the first are less powerful. Has anyone some experience if this could help?

I bought cheap (6€) aluminium 36T on Ali* (Deckas 104BCD Round Narrow Wide Chainring MTB) and it fits great - is silent. Original is steel - 38T. Cassette is also a cheap aluminium one from Ali* (ZRACE ALPHA 12s XD Cassette 12 Speed MTB Bike Freewheel 9-50T - Black,Compatible SRAM XD freehub...

Hi, just back from short city ride. Front 160mm - back 210x55 (was 50 when I bought it - took it apart and remove spacer and made whole service). I'm really impressed on that tubes - on straight could do 30km/h with no problem at level 0. Was actually sure that 0 still helps, so I turned off...

Because there were a lot of assembly questions we could all share knowledge about bike assembly. So there is my bike as it came - mat black finish - size XL with DC charging port on top, M600 motor, 840Wh battery. My initial plan was leave it without additional colour, but when I saw it i...

28. 1. 2021.

Got Frame today - need to paint it since the mat black finish is not OK. Overall looks nice.

Thank you. BR Bogdan

Uknl - how did you fix that bottle holder on your frame?

What's with that hole for the battery charging socket? Bootsdave has one, thaeber not?

First assure, that you heave 48V at motor - measure at that plug that comes from battery - perhaps you did not turn on battery. After that you shod turn on display by 3sec pressing the on button (bottom button from buttons connected to display). To get motor turning press potentiometer - it shod...

According to tracking Nr. my battery is now in Hungary - that's 9 days since I got tracking number - so I think it is not send by boat. Frame was send yesterday (ewerithing ordered 28. January).

M600 has legislation problems in EU (talking about selling complete bikes on EU market, not home enthusiasts), but M500 could be OK if they manage to bring something more versus well established competition (Bosch, Yamaha and Shimano) but currently it cost almost the same is heavier it's less...

Bafang service centre told me in January, that they will heave Service in EU till the end of 2021 if not sooner. They do produce some parts already in Poland so the service will probably also be there ?

Pos 2 has an orange connector that you can take apart (I'm guessing that from pic). Pos 3 the same - somewhere shod be a plug so you can take cable apart. Nut is always from inside and aluminium profile shod be between nut and frame (its hard to see prom pic, but my guess is that from Pos3...

Pos 1 is not a speed sensor - this is power supply that you connect directly to the motor. Speed sensor comes with motor. You cannot do anything wrong with motor connectors - they fit in just one hole. Does your pos 3 also heave this aluminium profile? Normally you push button inside without...

I got information regarding batteries (ordered end of January): Estimated time for 16Ah is at the middle of this month. If 17.5Ah, would be the end. I will wait for 17.5. BR Bogdan

M600 does not need special BMS - I got mine M600 last week and test it (on a table) with 48V battery and cheap BMS with just + and - connected. Can someone measure maximum size that will fit in E10 frame?