Hi,
I wanted to check the torque on the motor mounting bolts today. It occurred to me that there was no T30 on the drive side as described in the manual, but rather T20 and T25 screws. The instruction manual does not seem to be up to date.
Where can I find up-to-date instructions and how much...
i had chushcore in front and behind on ff levo at first, but wanted to save weight. tubolight has proven to be sufficient rim protection. I use cushcore on the front tire because it provides more lateral support. a friend had the problem that he pulled the tire off the rim when moving the rear...
Hi folks,
yesterday I swapped my fork on my SL and was surprised that the lower ball bearing of the headset sits directly in the carbon frame. So there is no metal sleeve or something like that ... is that ok so..? Is that normal?
and one more question: on the seat stay there is a screw on...
Hi,
my levo 2019 with 2400km is making some noise now.
The noise relates to the crank movement (not to the wheel) so i thinks there is something wrong with the main spindle or somethin in this area. But I also checked the wheel, the hub the chain and the chainguide allready. Noise comes...
I ride a 2019 levo in L and use a 180mm one up dropper. With a 30,9mm dropper (and adapter) it's possible to use the dropper completely pushed in the seat tube.
but i think it's on the edge, ...had so be very carefully with the cable routing, and also putted some grease in the cable at the...
hi,
got the update last week, didn't notice a power difference.
today i used walk mode the first time after the update and there was nearly no support. The bike did not move by it self, like it did before the update. After about 15 seconds I tried to set another gear and then a motor error...
first ride - first failure:
in the app, there were no velocity displayed when I was riding, so at home i checked the speed sensor for problems.
the speed sensor cable has a loose contact directly on the connector, sometimes it works now, sometimes not. So it has to be replaced under warrenty.
I...
19th of April, still no response from Specialized Rider Care
I own a levo, 700km, motornoise is getting worse. I'm afraid of getting stuck in the outback (of vienna, ok , not to far from civilisation).
GF wants an ebike too, should i get a levo?
probably not...
Hi,
my motor is making the same noise but not as loud as yours. Noise only when i use more than 50% motorsupport.
I Think the noise also gets louder and louder over time.
My motor hast about 700km, never washed my bike, never ridden in rain.
here: maybe Peter Hill has the same problem, i asked...
tf tuned took the shock back - money back.
Really very nice from tf tuned!
Now I'm searching for a new shock.
In the Kenevo owner thread there are some posts about exploding marzocchis.
Did any levo-marzocchi user have had same or some problems with bomber cr?
I've got a message from service now - the shock is fine, no failures.
But I still struggle to set RB.
pls check the videolinks:
1st video was made with the settings suggested from tftuned:
HSR 3 turn out from max
LSR 7 turn out from max
HSC 1,5 turn in from min
LSC 9 turn in from min
Dropbox...
Hi,
I also got a CC Coil with no Sticker. I asked CC if the serialnumber is Levo compatible, the answer was: no.
But tf-tuned tuned and changed the shock before they sent it to me. So there is still a "wrong" serial number on the shock, but the shock is ok for levos.
Dissapointing, that the...
Hi, i also own the black/nice blue verion, but i wanted a black grey colour scheme.
After searching for a while for the right logo without succes I decided to DIY:
So I placed transparent tape on the frame, drawed the logo on the tape, then puted the tape on a sheet of paper, scanned it...
I'm using a 1UP V2 with 180mm in a size L model. I use the 30,9mm Version with an adapter to 34,9mm. The 30,9mm version fits between the two screews from the pivot (in the seattube). Now its possible to nearly fully insert (only 2mm left) the dropper into the seattube.