hello vadll is it possible to create a view with all the parameters in which we can check the parameters that interest us and create a backup of these parameters in a garmin .fit file
normally, the cone is not stuck on the axle, it must be free so as not to turn with the axle when the wheel is tightened so as not to damage the frame. insert a screwdriver into the slot and move aside slightly, with another screwdriver push taking support on the clamping head and slide the cone...
hello, I replaced my rear axle with this one and it's perfect: just remove the conical washer from the original axle and mount it on the new
Axe passant arrière Rock Shox Maxle Stealth Boost E-Thru Interface 12x148 mm LordGun online bike store
00.4318.005.025 / Axle Maxle Stealth Rear MTB...
the shimano tool is not necessary, you just have to unscrew the 4 fixing screws of the plate to access the fixing screws of the motor behind the plate.
yes it is the di2 connector on the photo
on the prorace decoy in size M, my cable is 700 mm, I find it a bit short, when the engine is disconnected, it pulls on the cable and mine disconnected, I think that a 750 or 800 would be more comfortable
yes you have to drop the motor and let it rotate on the two rear screws, the cable between the derailleur and the motor is a bit short: ref EWsd50, a tip, pass a strap in the axle of the crankset which will support the motor to prevent it from tipping too much.
it is a good idea for those who use their smartphone during the exit, but would it be possible to develop a garmin app via the store connect IQ of garmin which stores this data in the .fit file of the gps, because garmin displays them on its GPS, but does not store them.