Search results

I've got an Amarok and my Canyon Spectral:on size Large fits in the back diagonally on its side with wheels still on. Rear wheel in first works best

If the pedals don't turn its got no place on here.

Have had similar issue and I reckon that the crack noise is coming from the plastic spacers between top of headset and stem. Putting a bit on grease on them and ensuring everything is sufficiently tightened seems to have resolved for now. May change from plastic to aluminium spacers in future if...

2018 Canyon Spectral:ON 8.0 - Shimano motor failed at 1500miles due to EO10/WO13 Error 2018 Canyon Spectral:ON 7.0 - Shimano motor failed at 1600miles due to EO10/WO13 Error

Also had the same issue with Canyon Spectral:ON 7.0 and 8.0. Shimano replaced motor on 8.0 last month and currently awaiting info from them on 7.0. Planning to sell both bikes prior to 2 year shimano warranty running out. Lost a bit of confidence in Shimano motors as a result of having same...

Fitted the Alu caps with Miranda cranks a couple of months ago and had no further problems with cranks since doing so.

I tried it and at first thought it was fine bust after a days riding noting rubbing between air can and underside of frame on one side. On Canyon frame the rear shock doesn’t always sit squarely as it attaches to suspension rocker via a floating connection at the plastic IGUS bushes. If Canyon...

I've had similar issue now on two e8000 equipped bikes. In both cases I got E010 error whilst stationary, switched battery off and on and without touching pedals etc got W013 error a few seconds after power up. Bike stopped working completely at this point and would not reset. Returned first...

This diagram covers the MY18 Spectral:ON only.

The diagram covers both the Spectral and Neuron. Check title block on drawing (y)

Ok no worries, thanks for letting me know ?

Hi Raine, great looking bike. Can you tell me where to get the carbon fibre motor covers from please. Thanks

Let that be a lesson then. Wear a helmet unless you have some understanding family members prepared to spoon feed you

Just noticed another thread on the site regarding the same subject and they suggest using longer (35mm) crank bolts. Might give that a go too.

Cheers Gary. Certainly worth a try. Purchase made!

This may be of interest to you..Save as much as 47% at Canyon, Rich Energy news, spy photos and more

Yes. I've experienced it with both the original XT cranks and my 155mm Miranda cranks as have 3 of my mates who have E8000 equipped bikes. Even with thread lock it still happens. Checking crank bolt tightness is now part of my pre-ride check before every ride unfortunately.

They are relatively easy to remove and refit with basic tools however I tend to use the excellent RRP bearing removal and insert tool kit. The RRP kit is a wise investment for when it comes to removing and refitting the other suspension bearings. I purchased the RRP kit from Wych Bearings for...

The original diagram that was for the 2018 model (which I have). The one attached covers the 2019 model and the Neuron:ON. There are 4 Spectral:ON MY2018 bikes in my ride group and in general all have been great. The only common issue that we have is with the IGUS plastic bushes wearing out...