Search results

Hi, sorry for the late answer. Of course it works! I was able to change the speed limit for one customer by bypassing the display speed command setting. It still shows 25 km/h limit on HMI but in reality it supports up to 40 km/h, which is pretty awesome. Display was not supported by Besst - i...

Hi guys, any ideas why i can't change ODO reading on C241 display? It works on C18 and C245 without problems...

That's great news! I must give it a try, many thanks.

That's ridiculously loud lol. I guess Bafang's accoustics room was malfunctioned during m560 development :ROFLMAO:

Check if the battery is not sleeping, you must hit read in controller tab several times, because Besst software is tricky sometimes. You must read S/N number of controller itself in order to write the data otherwise it won't let you.

In Besst Pro you can't set speed limit above 25 km/h. First set parameters in Pro, save and then go to regular Besst and change the speed limit as you want, it works only this way.

Like i said before, it is straight fit, bolted directly to the motor, no washers used anywhere. It doesn't interfere with anything. It just works.

There is no spacer on M500 or M510. You need special tool to remove the chainring. Also it has counter clockwise thread, be careful.

Should be this one, 1T3 cable...

Pretty clear, no rubbing at all. Yes you also get some spacers in the package. Happy with it, zero drops so far.

Yes they fit, M510 has ISCG05 bolt pattern mounting. You can use any ISCG05 chain guide you want. I'm using this one, it is dirt cheap, works perfectly: 2.77￡ 6% OFF|1x Mtb Chain Guide - Iscg 03/05 Bb Post Mount, Wide Narrow Gear Guider

Can motors such as M510 have speed limit setting in controller, not in HMI. UART based motors have speed settings in HMI.

Set parameters in Besst Pro with 25 km/h limit and save. Then go to regular Besst and change the speed limit to desired amount, it works for me.

I have this one, works like a charm.

Hi Petr, i have also Leader Fox (Acron precisely) with M510, but i have no such behaviour as you are describing here, mine is buttery smooth even when peddaling low. Although i have different software version. My first motor died after like 100km, controller stopped working, but they send me a...

It looks like M600 48V firmware, doesn't it? Anything interesting for M510?

I think your statement is not exactly true because i was able to set speed how much i wanted even on version 1.2.42 when my account was working. Now when using only bypass to log in i cannot set it higher than 25, not even 27 like you mentioned, i tested it now on version 1.2.42. I tried to use...

Hi guys, i've encountered a following problem. When i try to raise the speed limit in Besst, it shows me this error and i'm unable to write new data, however when i want to lower the limit it works. Any ideas where is the problem? Thanks.

Hi guys, does anyone tested if M400 motor with UART bus can be modified with Bafang config tool? The same one used for modifying BBS engines. thanks.