Search results

I would not lift the microcontacts with a metal or plastic tip which conducts static electricity but with a wooden toothpick

I am lucky to see that I have done the same job! In reality a little bit better, because I have now only sealed ball bearings with the ABEC 7 Standard everywhere, and not only two, these from the crank. Of these two ball bearings, one is originaly sealed only on one side ! ( It should also...

After my lovely 2772 km with my super-serviced new-old E8000 in 2,5 months I made now 1095 new kilometers in a month, but with my 4th Shimano DU to be conform and covered by Wertgarantie, my insurance, which reimbursed my new E8000 and has its Serial Number I had to declare. My 3rd Engine, the...

But today it's time for my 3rd engine, this new-old-E8000, to retire. Now spring is coming fast in Alsace, and my rides will exceed again my usual 100 to 120 km for the winter, to approach 200 km or slightly exceed it. Because my Insurance Wertgarantie covers my Husqvarna with my 4th engine...

I made now 2772 km since servicing on November 15, 2021. All is well, no issue with the torque sensor , no W013 + E010, no issue with the two clutches. Crank axle is ok like new.

Since November 15, 2021, I made 2588km with my new-old E8000. See my comments with a lot of pix before and after this point.

The designer of the E8000 and the EP8 is... a certain Henry Bosch, a Dutchman, who is the product development man at Shimano. He works with another Dutchman, Bas van Dooren and with his Japanese colleagues. From the Netherlands he is the pivot man between Europe and Japan since 16 years.

May be you are right. But since November 15, 2021, I made 2588km with my new-old E8000. See my comments with a lot of pix before and after this point.

I agree. Frame and fork of my Husqvarna GT2 are well built for the money, but I had to change everything around them. On the other hand the lacquer coating is exceptional. No any sign of fatigue through the years of riding. And I'm not talking about the four BT-E8010 batteries (one dead after...

Yes, Shimano E8000 servicing is easy and absolutely reliable. For me since November 15, 2021 and I'm very close to 2500 km after servicing in just 2,5 months. See all my reviews and descriptions with lots of photos before and after this point.

??? Vi förstår inte vad du skriver. Kan du snälla 1) skriva på engelska, 2) lägga in bilder 3) och ge oss så många förklaringar som möjligt av allt du har gjort på din motor? Allt detta kunde hjälpa oss att ge dig svar. Tack så mycket mvh

2009 kilometers since E8000 servicing on November 15, 2021 22 rides from km 17,423 to km 19,432 without any trouble or doubt. -------------------- ----------------------------------------- I think I have now a real opinion since my complete and successful servicing of my e8000 DU, and I...

@electricbogaloo I think I have now a real opinion since my complete and successful servicing of my e8000 DU, and I would specify that I noticed this effect since the purchase on May 30, 2019 of my Husqvarna and before the first 17,423 kilometers of this third engine, the E8000. When I opened...

A year ago I described step by step the necessary transformation of the battery mounts if we want to upgrade with a 630 Wh. I am French from Strasbourg, Alsace, but I wrote in German on this German site >>> pictures are enough to do the job. Please go further in this german thread for my next...

It doesn't matter what Shimano used, to seal the case. But there is of course originally a very light transparent sealing film. I use Blue Loctite for my pre-war cars since... over 40 years. Before closing the motor unit, take care to remove this transparent film with a razor blade...

Use this to rebuild

2000 km after servicing will be reached the 1st week of January, I have the flu since 2 days, but fortunately not the covid! --------------------------------------------- Even though I am 100% satisfied with my repair, there will come a day before this summer when I shall put my 4th engine on...

After my two collapsed E7000 with 1400 km or 2500 km due to error W013 + E010, my third Drive Unit under warranty, the E8000, made 17423 km from December 22, 2019, till November 15, 2021. After my servicing my E8000 made from November 15, 2021, till today 1711 km more. My E8000 made a total of...

1711 km since 15. XI 2021 ;) Today 121 km, 968 m D+ :) Only Eco High like ever :whistle:

@KTMJack How have you done that ??? I wrote, that nobody has to disassemble the torque sensor , but that it is possible without any trouble to remove his ball bearing. Only do that peu à peu with a small screwdriver until you have free space enough to use the puller >>> A magnet is made of...