Search results

Hi jxj, I just received the chain checker and the 0.75 side falls at some places easily in the chain and at a few places with a very gently push. I also checked the chain with the Mitutoyo caliper. You mentioned: new chain = 5.715"= 145,16mm 0.5 = 1/2% stretch/wear = 5.745"= 145,92mm 0.75 =...

Thanks and yes, that's exactly the reason why I wanted to start with the twin chain rotation.

I am aware yes, I guess it's the advantage of The Netherlands being such a tiny country where we have excellent logistics.

Hi jxj, Yesterday I ordered the chain checker which you advised. We can order until 23:00 local time. I ordered it just in time 22:50 and will receive it this morning. I will let the results know.

Thanks! I am not 100% sure but can the reason of the high wear on the CN6600 Ultegra chain be related to the fact that it isn't designed for ebike usage?

What happens when you connect Mission Control? When I had the issues which I described in my previous post I had problems when connecting to MC too. Maybe another idea, did you have another phone previously paired with the bike? If so, connect that phone to the bike and go to the bluetooth...

I had connection issues once I added a bluetooth speaker connection. My advise is go to the bluetooth settings page and make sure you remove all bluetooth devices which are or were connected besides the bike itself. Let us know if it helped please. After I removed the speaker bluetooth...

My 2019 Levo Comp XL with 29ers came in low position. I haven't tried the high position yet.

Thanks for your feedback again! I will measure the original chain tomorrow and will post the results here on the forum. Like you I always clean my bike after each ride. I also try not to shift under load. I must admit that it has been very muddy here in The Netherlands but still I am surprised...

Thanks for the excellent support! These contributions are of high value and gain back a lot of trust.

Hi jxj, Thanks for your feedback! A few more questions if you don't mind: - When you rotate your chains frequently, would you say I wasn't quick enough by rotating the chain after only 300km's? The quick wear really suprises me but I was used to a normal mtb and no emtb. - I can't find the...

Hi guys, May I ask you for some advise? I am riding the 2019 Levo Comp with the standard KMC X11ET chain and the SRAM PG-1130, 11-speed, 11-42t cassette. I was advised by my LBS to extend the driveline life by running two chains. So I ordered a 2nd KMC chain e11 EPT (EPT=anti corrosion...

Strange... Mine provides: - serialnumber - manufacturing date (July 2018) - country of origin (Taiwan)

There should be another sticker on the frame. It's positioned above the rear shock on the bottom of the top tube.

The manual says:

I like your first idea very much! The second idea isn't feasible from my point of view as I guess when you would swap the spare 1/2 or 3/4 length battery during a ride where would you leave the original full length battery then? You will still need to carry the long battery on your way home.

Hi, Maybe it's better to post this question in the official BLEvo thread? Please also post your bike model and firmware version and if you are using the BLEvo ios or Android version.

Hi Vilt, you could also consider Levo Range Extender which is made in Belgium by Danny.

The Official BLEvo Thread - EMTB Forums

Maybe this post can help you further? BLEvo, the best thing for your Levo and Kenevo - EMTB Forums