Search results

Hi, I’ve added a SIM card to my Amflow, a Lebara 5gb monthly payg, and I’ve noticed that it does seem to drain the battery whilst not being used? Is this normal? Also I haven’t had any uploads from the bike with the sim enabled?

All Working fine on my 2022 Rise H30

Nice frame bag, what make is that?

2021 M20 10000km still original motor 2022 H30 1st motor @ 2100km and 2nd motor currently at 1500km

Well it seems our charger has died, it’s not flashing green like it used to, it’s strobing green whether it’s plugged into the bike or not.

The bike sits 2-3mm higher than what it was, I can compare as we have two rises in the house.

I have my link installed, and can safely say that the BB height is different

Yea, I would guess at about 2-3mm, it feels the slightest bit taller.

Im running a Rockshox Monarch Rc3 from a 2016 trek slash, it’s 210x60 with no offset bushings as the i2i hasn’t changed, just the extra 5mm stroke. This is on a Medium H frame. The X2 won’t work on any size frame as far as I know as the air cam is too large and hits the top tube.

I am running the link with a 210x60mm shock, it’s approximately 162mm travel on the rear.

Have ordered a link and the hardware kit, UK based, will update when fitted to my Endurofied H30 (160 zeb, 150mm rear with 210x60 Rc3)

I didn’t have any issues with either pairs of E13 cranks on our M20 or H30, but I did replace mine on the H30 with shimano EM900 as they became available

Nothing wrong with the geo on the rise, it’s a great trail bike

The shock pivots upwards, shouldn’t be an issue. Fidlock also make a tilted base, or you could put a washer under your lower mount to tilt it yourself.

So is the new linkage stiffer than the original, and is it retro fittable to the original rise?

I have both the enduro wide and the trail wide setup for our Rises, have had zero issues with the lighter trail wide, and found them to be a perfect match for the wife’s M20

Personally I would go for a pike/lyrik and a super deluxe rather than the fox stuff, only due to the poor QA that most of my fox gear has had ( numerous warranty issues with rear shocks)

Very similar to what I run my Rise H, zeb 160mm, custom dhx rc4 with offset bushings and Hx1501 wheelset. Done a few days at bikeparks on it and it feels pretty amazing, weight is at 20.1kg

I have tried various coil shocks on my medium rise and the wife’s (H30 and a M20) and the only ones that worked were those that could take a fox sls spring as it’s a few mm smaller in diameter. I have used a DHX rc4 shortened to 210x58 and also a DHX Rc4 at 216x63 with 2x 2mm offset bushes (both...

I found that I was over tightening the preload key for the top link and this was causing my creak. I’ve since eased it off and now have a silent bike. on a separate note e13 are having a25% off sale direct on their website for anyone who needs chainrings.