Search results

Yes the tolerances are too tight, and some are really too difficult to push in, same problem with the charger connector. So I've removed one o-ring on my charger connector, and now it's better. Thierry

If you use the buggy 2.2.1 version, remove it, and downgrade to 2.2.0 version! That's what I've done, and it sems to work well now. Thierry

See page 26 and 27 of your Levo SL paper manual or page 27 and 28 of the pdf version. It's clearly described (images 12.4 to 12.6), but not so evident without seeing the procedure. Thierry

Yes, thank you, I've read the thread several times. Just have a look at the graph of a typical motor, below. At low current, the efficiency drops quickly. That means you can't thrust in the value below 20%, certainly not at or below 10 %. Have a Nice Day. Thierry

Hi, I'm a bit confused with the assistance and maximum power limit of Mission Control. It seems that the limits are electricals, and you have to take efficiency into account. The big question is: Is the efficiency the same when you limit at 10, 20, 30, or 60 %?! Or like I think, the...

What is the version?! The latest 2.2.1 is buggy, the 2.2 is better for me. Thierry

Yes I've had the confirmation that the power given is electrical power, about 300W, and if you take into account efficiency, you have 240W of mechanical power. Thierry

They are right Levo SL gives you maximum 1.8x rider input as stated above. Thierry

I've seen a graph, but don't remember where it was. On that graph, you can see that when you set assistance to about 60%, the motor add the same amount that you provide with the pedals, up to the defined ceiling or to 240W max. When set to 100%, the motor gives about 1.8x your input. But...

Looks like foam tape used for race bike handelbar! Thierry

Katastrophe ! The 2.2.1 version is worse than the 2.2. Not only I canno't save presets without wifi, but now I canno't have access to the saved presets. So I've deleted the 2.2.1 and go back to the 2.2 which is better for me. Hope this may help. Thierry

I had this problem with 2.2 version, and it was because I was not connected. As soon as the wifi was good, the presets have been saved. But I have not tried with the latest version.

For those with TCU, round connector, Pin 6 is the common, but I don't remember for the others. Thierry

Sorry, but you need to be connected to save preset! Try without connection, and you'll see the error message. It's annoying, because here we don't have network everywhere. And I think I'm not alone. Thierry

@Specialized Rider Care Good Day, I'm not sure you've read my message of the Feb 17, 2020. I like the Presets in of the version 2.2.0. But I hope that for the future version we will not need to be connected to save them, because in some areas, we have no network. And I'm sure I'm not alone...

You have 4 switches in the remote control, so you can use buttons like the one you show. Thierry

It's the best way to to this quickly. You can store it safely at about 75-80% for months. Thierry

Yes. Thank you.

@Specialized Rider Care Good Day, I like the Presets in of the version 2.2.0. But I hope that for the future version we will not need to be connected to save them, because in some areas, we have no network. And I'm sure I'm not alone! Of course, I know it's to improve the App that you do that...

Good Day, I'm a new member from East Belgium who needs help for motor settings. That's why I've read some posts relating Levo, Mission Control, and BLEvo. I hope that Mission Control will not need to be connected to save the Presets in the new future version, because we have no network in...