Search results

We Mine went at 500 miles. I’m back in the dirt now, and I will keep an eye on it.

My shock came back in one week. The repair sheet says new seals, damper, and full service. Works great now!

For people in the U.S., are you getting a fast response for warranty replacement of your broken battery door cover now that the new improved version is released?

Mine is currently at Fox Factory for warranty. Let you know what they find.

the cables do rattle in the top tube! usually right underneath the TCU. i would remove the TCU and pull out the extra length of cable floating around under there...add a couple extra zip ties to the cables and re-install. this is very common source of a rattle in these bikes.

The Fox Float X2 Performance shock on my 22 Levo Expert started leaking air at 500 miles. Went from 175lb of air to 160lb of air in 6 hours, and then 175lb to 100lb over 3 days. Anyone else have issues with this shock? Shipping mine to Fox for warranty this week.

Rear tire Maxxis DHRll in 27.5x2.4 DoubleDown casing and MaxTerra compound 👍

Yes...2.4 in the rear all day! Going to rail the corners.

Remove your TCU on the top tube and put a zip tie around all the loose cables. This is potentially where a cable is tapping against the frame while riding and creating noise.

Yes. I was getting motor vibration noise. They went away once I torqued the front motor bolts to spec.

I torqued to 9Nm based on direct response from Specialized and I have no motor noise.

I contacted Specialized on this exact item. Rider Support did confirm that 9Nm is the correct torque spec for the front motor mount bolts.

Submitting a Rider Care support request through the Specialized website has been very successful for me multiple times. Typical response is provided by the next business day.

Sounds like a race car 🏎

The SWAT tool was always coming loose on my Expert. It either creaked or rattled. I replaced it with the OneUp V2 stem tool and problem solved. It now has more options for tools and no more creaks or rattles.

Check into the OneUp Carbon bars. Huge reduction in feedback from the stock set.

You still running the stock forged crankset that comes in the Expert, or are these the Carbon crankset? If they are the stock forged, what crank boots are you running and do they fit snug?

Out of curiosity, what is your rider weight and how much PSI is currently in the shock?

i would reach out to Fox Warranty directly and bypass your LBS. they have been very responsive each time i have worked direct, and turnaround time was 10 days from shipping out with a warranty issue. they will provide you a prepaid shipping label to get your shock sent. i just read in a thread...

Yes. You need to remove the Specialized frame protection to install RideWrap or InvisiFrame. If you don’t, there will be air bubbles around the Specialized frame protection.