Has anyone got a chainstay bolt for a 2018 levo comp carbon I can buy? I ordered a bolt kit from Berkshire cycles but the wrong kit has arrived. The bolt is 110mm long and 12mm in diameter.
Thanks
I've got my brose 1.3 motor back from performance line bearings. Started to install and I have 2 plastic washer/spacers (see photo) and have totally forgotten where they go. I've just taken out the motor, nothing else. Bike is 2018 specialized comp carbon. Anybody able to help?
Cheers
Matt
https://www.evanscycles.com/brand/fox/enduro-d3o-elbow-guard-933818?utm_source=rakuten&utm_medium=affiliate&utm_campaign=digidip&utm_content=10&utm_term=3001042&ranMID=45658&ranEAID=hL3Qp0zRBOc&ranSiteID=hL3Qp0zRBOc-t3KU4hKT6HpagBdHj5wYfg#colcode=93381803
Hope this helps someone.
Hope this helps someone, just ordered.
https://www.hotukdeals.com/deals/five-ten-trailcross-gore-tex-gtx-mtb-mountain-bike-shoes-ps105-at-adidas-app-only-3777001
Hi, I just went to change the volume spacer, let out all the air, unscrewed aircan, loud pop. Now the air can is stuck at the bottom of the shock. As I pump it up it doesn't move and the air leaks out. Rebuild?
Thanks
Ok, I've done a bit more research. The charger 2 rct is compatible with both my forks. So surely my normal charger from the pike would fit?Anyone done this before I start pulling things apart.
Thanks again
Hi, I have a spare pike with a charger damper (see photo). Would this fit into my 2018 revelation? I've put a 160mm air spring in the rev, if this makes a difference.thanks in advance.
Thanks, the small port on the air spring was blocked with grease . I let the air out, took off the top cap and pulled up really hard a few times. There was a pop sound and the forks equalised. The fork is now much better.