Search results

If the new phone is running Android 12 or later, the folder is not the same... you can see the new folder under "GPX Import" menu...

In the old phone maybe the data was stored under /BLEvo/.. You can try to copy all the files inside this folder on the new phone..

Thanks.. I saw the video.. I will try to understand why this behavior...

Ok, now I remember.. So the issue is only on Garmin device. I don't remember the model of your Garmin, but my watch (Fenix 6) has the automatic calibration of the speed/cadence sensor, and it give the correct speed and distance.. I don't know if always your Garmin has this automatica calibration...

With the new Firmware 3.1 the Levociraptor Team solves the issue notified by @fraatti . When the KM of the bike are over 4000km, the km are notified in the CSV are correct. I don't understand your issue about "altered minimum speed". Could you explain better and send an email to...

The data is received from the battery, so I think also the second battery is 460kwh... Do you see different serial number for the 2 batteries?

If you see the green connector I think Levociraptor will work correctly with the Tero bike... Please contact at [email protected] for more details..

You have to scan for the new bike... Then please share the battery monitor screenshot...

There are some picture and link here https://blevo.forumfree.it/?t=77109351&st=45

I checked with the Levociraptor Team and when the km are over about 4000km, the value is reset to zero. There will be a new release of Levociraptor firmware that will solve the issue. Thanks for the notification This option is used for Smart Power and/or Smart HR and/or when you want to select...

A few days ago I released version 3.12.5 of BLEvo for Android. Here the changes introduced - Added audio message for enabling/disabling Crash detection (very useful for understanding when to put the bike down without activating the crash detection) - Added audio prompt for high power (>900...

29" should be 2300mm, 27.5" should be 2255mm or 2160mm. It depends from the tire type. With this option you can use BLEvo to adjust the assistance percentage, like is done with the Smart Power functionality. Maybe you have the Smart Power activated. Try to disable or configure it better...

The distance is get from the bike. If the data is not updated means that the bike doesn't send the distance. To avoid the issue you can use the GPS data in the configuration menu..

Please remove any calibration of the DEM. In the pictures posted, there is the calibration with DEM activated..

The value depends of the wheel size... if you have the 27.5" you should set 2255mm, if 29" set 2300mm For the second screenshot, you need to scan and add the Levociraptor device also in BLEvo...

Try to reduce the reactivity and enable the expert mode, where you can handle the dynamic legs power..

This happen only when the TCU doesn't restore the de restricted value.. In some firmware version can happen

I found the link where explain how to use another App on Karoo device. I think it is not so difficult to do.. I use the King Kong 2 mini in Portrait mode and it is not so bad, so maybe also Karoo device can be good.. Maybe the screen is too small (3.2" vs 4")..

The very strange thing is that the consumed battery is not the "Start" - "End" battery. BLEvo reads the values from the battery and report it.. Maybe I have to check the CSV file to understand better.. Can you send it to [email protected] with copy/paste of this message? Thanks.

This is an old model of the Levo/Kenevo without the TCU, so maybe you can unlock the speed for this bike with BLEvo... you cannot use Levociraptor on these bikes..