Levo Gen 2 Brose Belt Service Kit for S Mag Motors

[skyhigh levo]

Does anyone in the USA have experience with the Brose kit that upgrades the motors to the new belt?
I attached a copy of the installation manual from the kit so I know it exists.
You can get it online from overseas but shipping is slow and expensive.

 

[1Nixxxo]

Does anyone in the USA have experience with the Brose kit that upgrades the motors to the new belt?
I attached a copy of the installation manual from the kit so I know it exists.
You can get it online from overseas but shipping is slow and expensive.

BROSE MOTOR BELT SERVICE KIT C - T - TF - S (ALU)

BROSE MOTOR BELT SERVICE KIT C - T - TF - S / SPECIALIZED 1.2 and 1.3) (2017-2018)

www.axevotech.eu

Guess they'll ship it to USA

 

[Bearing Man]

Our guy in America has these in stock, you can contact Michael through our site here: American supplier -

 

[WatermanJim]

My buddys 2017 motor is making noise so I bought a belt kit and the special .2nm torque wrench from some place in the EU. shipping was no problem. Need to find the other 4.3nm toque wrench and im ready. Doesn't look like a tough job, just follow the instructions.

 

[Jasonjacobsgeorge]

My buddys 2017 motor is making noise so I bought a belt kit and the special .2nm torque wrench from some place in the EU. shipping was no problem. Need to find the other 4.3nm toque wrench and im ready. Doesn't look like a tough job, just follow the instructions.

As far as I know, Brose does not build belts, Gates design and build belts for Brose. Brose does not sell belts E86001, have to send in for repair. Here is the Brose Replacement Drive Belts, not sure if it ship to USA.

 

[Bearing Man]

As far as I know, Brose does not build belts, Gates design and build belts for Brose. Brose does not sell belts E86001, have to send in for repair. Here is the Brose Replacement Drive Belts, not sure if it ship to USA.

These belts are the same size, but once again they are fibreglass! They will normally last a maximum of about two weeks if you are a gentle rider. Brose belts are carbon fibre strand and last much much longer.
Below you can see a fibreglass belt after one ride, when it strips it is all light and fluffy, when the brose carbon belt strips it is a much blacker messier affair!

I know I said this earlier but we sell Brose belts through our American supplier, he currently has stock of genuine Brose belts in America so you guys over there don't need to have your bikes off the road while you wait for a belt to be sent from Europe or the UK. AMERICAN BROSE PARTS SUPPLIER

 

[Jasonjacobsgeorge]

Does anyone in the USA have experience with the Brose kit that upgrades the motors to the new belt?
I attached a copy of the installation manual from the kit so I know it exists.
You can get it online from overseas but shipping is slow and expensive.

I bought 3 Brose replacement belts from this supplier, "e86001" mark on the belts. These 3 belts for 3 different customers. It has been 4 weeks approx since replaced with new belts. So far so good.

Brose Replacement Belt

Brose Replacement Belt - Carbon Cord - E00064 E79603 E86001 E01680

www.zzr-parts.com

 

[soft-pedal]

I bought 3 Brose replacement belts from this supplier, "e86001" mark on the belts. These 3 belts for 3 different customers. It has been 4 weeks approx since replaced with new belts. So far so good.

Brose Replacement Belt

Brose Replacement Belt - Carbon Cord - E00064 E79603 E86001 E01680

www.zzr-parts.com

Could you update us with your 3 year followup using the new belts?