YT Decoy thread part 2
- Thread starter Rob Rides EMTB
- Start date
Over the east side, North Yorkshire Moors.
I do not know where to put this information, maybe someone moves it and makes stiky!
SRAM Recalls RockShox Front Suspension Forks Due to Crash and Injury Hazards
SRAM Recalls RockShox Front Suspension Forks Due to Crash and Injury Hazards
Thanks for this - I will create a thread
Ecky get the Shakwrap precut sheet in gloss. It’s worked well for my top and seat tube, rest of bike is fine as well protected.
Save a fortune, keeps the top glossy bit shining and all done in 20 mins plus loads of spares for cable run areas.
So have you just covered the raised two tone part of the top tube?
I’ve some black vinyl wrap kicking around and some helitape. I’ll put mastic tape on the chain stays as I have a habit of rubbing my heels on them.
Have to say though, my Evil has a proper Invisiframe kit fitted from when I bought it and it has held up way better than my own efforts on the Focus.
I’ve some black vinyl wrap kicking around and some helitape. I’ll put mastic tape on the chain stays as I have a habit of rubbing my heels on them.
Have to say though, my Evil has a proper Invisiframe kit fitted from when I bought it and it has held up way better than my own efforts on the Focus.
Yes, the top two-tone part, mine’s black/stealth but the high gloss finish on the only bit that your shorts rub against would soon be matt black without the cover.
I Invisiframed my Capra and it was awesome, but in the absence of a kit now, there’s this kit from Shack and it has so many cut outs you can get plenty of cover on the parts you think you’ll scuff up.
The bike is pretty well taped up from the factory for shoe rub.
Last edited:
The picture is Super Nice, the bike is super nice, but the employess from YT are NOT super nice!
After 3 delays for my order, today i received another 3 weks of delivery.
What bothers me is the lies that YT employees have about the availability of bicycles!
This is mail from YT:
(YT Industries)
Jul 4, 12:47 CEST
Hello Sorin,
I can only give you the information I currently have.
The forks are not the problem, as far as I know.
Fact is, the bike is not yet built.
The information on the website stating the bike is "in stock" is a bug on the website, and we're working on solving this issue.
You have now the option to wait until it is available.
The other option would be to cancel the order.
Thank you for your understanding.''
With lies he treats his clients! How the hell do you say it's a bug with the site, when that information is on the site for 1 month? This is the bad practice of YT, lied to customers about the availability of products!
So my order is already delayed for 42 days and it's been another 21 days.
Last edited by a moderator:
The picture is Super Nice, the bike is super nice, but the employess from YT are NOT super nice!
After 3 delays for my order, today i received another 3 weks of delivery.
What bothers me is the lies that YT employees have about the availability of bicycles!
This is mail from YT:
Moritz (YT Industries)
Jul 4, 12:47 CEST
Hello Sorin,
I can only give you the information I currently have.
The forks are not the problem, as far as I know.
Fact is, the bike is not yet built.
The information on the website stating the bike is "in stock" is a bug on the website, and we're working on solving this issue.
You have now the option to wait until it is available.
The other option would be to cancel the order.
Thank you for your understanding.''
With lies he treats his clients! How the hell do you say it's a bug with the site, when that information is on the site for 1 month? This is the bad practice of YT, lied to customers about the availability of products!
So my order is already delayed for 42 days and it's been another 21 days.
Which model are you waiting for?
First ride with my decoy base yesterday!
So nice bike!
But:
Yari fork is hard to bottom out with 30% sag and no compression.
Just removed all 4 tokens and set sag to 25%. Hope for a smoother ride next time!
And the fork also lowering itself to 10÷ sag without weight. I have equalize the air chambers without better result.
So nice bike!
But:
Yari fork is hard to bottom out with 30% sag and no compression.
Just removed all 4 tokens and set sag to 25%. Hope for a smoother ride next time!
And the fork also lowering itself to 10÷ sag without weight. I have equalize the air chambers without better result.
You should cancel itThe picture is Super Nice, the bike is super nice, but the employess from YT are NOT super nice!
After 3 delays for my order, today i received another 3 weks of delivery.
What bothers me is the lies that YT employees have about the availability of bicycles!
This is mail from YT:
(YT Industries)
Jul 4, 12:47 CEST
Hello Sorin,
I can only give you the information I currently have.
The forks are not the problem, as far as I know.
Fact is, the bike is not yet built.
The information on the website stating the bike is "in stock" is a bug on the website, and we're working on solving this issue.
You have now the option to wait until it is available.
The other option would be to cancel the order.
Thank you for your understanding.''
With lies he treats his clients! How the hell do you say it's a bug with the site, when that information is on the site for 1 month? This is the bad practice of YT, lied to customers about the availability of products!
So my order is already delayed for 42 days and it's been another 21 days.
Try sliding a zip tie down the fork wiper seal there maybe some air trapped in there.
I hear when the air goes between the chambers, can it still be air under the sealing?
Looks fine now, lets see after next ride!
- Thread starter
- #107
Hi guys,
When copying / pasting emails please can you edit out the names so we can make sure we are compliant on GDPR etc
Cheers
Rob.
When copying / pasting emails please can you edit out the names so we can make sure we are compliant on GDPR etc
Cheers
Rob.
I'm also waiting for a Base (m), though mine wasn't supposed to be available until yesterday.
If there's a huge backlog I might be waiting a lot longer!
If you cancel don't order a Canyon as they are doing exactly the same thing.
I am not surprised you are not bottoming out with 4 tokens in.First ride with my decoy base yesterday!
So nice bike!
But:
Yari fork is hard to bottom out with 30% sag and no compression.
Just removed all 4 tokens and set sag to 25%. Hope for a smoother ride next time!
And the fork also lowering itself to 10÷ sag without weight. I have equalize the air chambers without better result.
I found on my Lyrik ( Jefsy) that 2 tokens gave a smoother ride compared to zero tokens as I could run lower pressure and improve small bump performance.
DECOY FULL CARBON 2019
It looks like Invisiframe has finished with my bike, they now have a kit to buy on their web site
Did you go for gloss or Matt?
No idea. I just gave them the bike and haven't got it back yet. Your best bet is to ask them which they recommend
I guess it might be a difficult choice with the mix of gloss & satin paint on the bike. Might wait for you to receive your bike back & hear your thoughts??
Mine was supposed to arrive this afternoon. All that turned up was the accessories......
No, tomorrow apparently! Had a text an hour ago.
Result!!! Best of times opening the box and building it up ?
Only bit in the tool box worth having is that pedal Allen key!!
The torque wrench looked like it had promise but sooo chintzy!?
EMTB Forums
Latest articles
-
Introducing the Forestal e-Cygnus - a downcountry and XC emtb
The new Forestal e-Cygnus is a slightly unusual emtb. It comes in two... -
2025 M1 Sporttechnik EN 8.0 review
The M1 EN is one of four M1 models built on the same frame. Well, it’s...