Where are all the HaiBike riders?

[eebit]

Ripping this thing at the moment, 2019 AllMtn 6.0 . Looks amazing, and a solid allrounder on the trails. Just switched to 2.5 tyres instead of the stock 2.8's. Feels more agile and it's easier to put it where I want it now.

 

[JoshDwnHll]

Bosch are the best to deal with when it comes to warranty not to mention always trying to look after the previous model motors with updates etc

Unlike most i actually prefer the external battery and im currently saving for a second one for longer trips.

Ive done a few upgrades on my dwnhllpro to get it riding the way i like and now it just flys down everything

I found that haibikes medium is very big and would be more like a large with other manufacturers

 

[BJep]

Here is my latest love. But the number of pedal strikes is bonkers. I dont get it...

 

[JoshDwnHll]

You may have to try the shorter cranks or your sag may not be set up correctly and you're sitting too low in the suspension travel maybe?

 

[noddler]

Hello from Bavaria.
Just got my first eMTB, a XDURO Allmtn 9.0.
Riding MTB for 30 years now. For me it was a good choice to switch to E-Power. Lot of fun and I am out in the woods more often than I was with my old Cube.
Trying to solve some problems with my bike for more fun.

 

[eebit]

Here is my latest love. But the number of pedal strikes is bonkers. I dont get it...

View attachment 5704

Buy some 155 length cranks, I got some a year ago and would never go back to longer ones. You can pedal through anything it's so much better. I also find it more balanced somehow when cruising with your pedals level. No down side as far as I can tell. In action:

 

[rocky.28965]

Got a part number for the 155 cranks?

 

[eebit]

Got a part number for the 155 cranks?

I use these in 155mm: Miranda Bike Parts

 

[BJep]

Thanks all- I'll report back how I get on

 

[rocky.28965]

Thanks all- I'll report back how I get on

I notice your bike is a Fullseven.
What's your measurement from centre of crank to ground.
I have 324mm on my Fullnine.

 

[rocky.28965]

I use these in 155mm: Miranda Bike Parts

You fitted these to a Bosch, does the Yamaha have the same cranks?

 

[eebit]

You fitted these to a Bosch, does the Yamaha have the same cranks?

I have them on my 2018 AllMtn 8.0 Yamaha PW-X bike. The 2019 AllMtn 6.0 above has longer cranks, and I actually had a massive highside into the bushes after clipping a root on the inside of a corner last ride on it as I wasn't used to them! Will never use cranks longer than 160mm again if possible on an eBike.

 

[Rob Rides EMTB]

I have them on my 2018 AllMtn 8.0 Yamaha PW-X bike. The 2019 AllMtn 6.0 above has longer cranks, and I actually had a massive highside into the bushes after clipping a root on the inside of a corner last ride on it as I wasn't used to them! Will never use cranks longer than 160mm again if possible on an eBike.

Reminds me of what happened to me earlier this year, damn pedal strikes!

 

[R120]

@eebit

Did you get a chance to try the Flyon when you where at the photoshoot?

 

[Old Northern MTB'er]

UK Haibike xDuro Allmtn 9.0 here! Awesome piece of kit!!

 

[eebit]

@eebit

Did you get a chance to try the Flyon when you where at the photoshoot?

I have ridden prototypes of it. The motor is far above and beyond anything else on the market. On steepish uphills where you normally go around 14-16 Km/h with a Bosch or Yamaha motor, you easily hit 25 Km/h. I made climbs on it that I didn't get anywhere close to making on my other bikes. Can't wait to try the finished bike!

 

[BJep]

I notice your bike is a Fullseven.
What's your measurement from centre of crank to ground.
I have 324mm on my Fullnine

I measure 325mm on mine, unladen. However I think my issue is a mixture of too much sag (40%), BB/crank width, and slightly larger pedals. I'll sort the sag before I replace the cranks, then learn to ride my bike better!

 

[rocky.28965]

I measure 325mm on mine, unladen. However I think my issue is a mixture of too much sag (40%), BB/crank width, and slightly larger pedals. I'll sort the sag before I replace the cranks, then learn to ride my bike better!

For my weight mine should be at 110psi but I'll put it up to 140psi & see how that goes.

 

[Rob Rides EMTB]

I have ridden prototypes of it. The motor is far above and beyond anything else on the market. On steepish uphills where you normally go around 14-16 Km/h with a Bosch or Yamaha motor, you easily hit 25 Km/h. I made climbs on it that I didn't get anywhere close to making on my other bikes. Can't wait to try the finished bike!

The FLYON has huge interest, really looking forward to this one ?

 

[RobertK]

What about speed limit in HaiBike - is it possible to increase and if yes is it difficult.

 

[mymodel6]

View attachment 5652

Fooking nice!!

Was so close to getting one of these but the Mrs wanted a Kenevo, there was no budging her and i thought it best for us to have the same. As for the title of this post though i have to say i am equally perplexed, i've only seen one Haibike out in the wild, one. I was so revved up about their DH bikes i though everyone would have them, but i see shit loads of Spesh's, but naff all Haibikes, weird...

 

[mymodel6]

What about speed limit in HaiBike - is it possible to increase and if yes is it difficult.

There are many dongles available, Google it.

 

[mymodel6]

The FLYON has huge interest, really looking forward to this one ?

The new Flyon bikes deserve to be as popular as the Levo on looks alone...

 

[misplacedyank]

Hi all, I'm a new Haibike owner from Arizona. I've only put about 200 miles on my bike but I'm loving every ride. I've been a roadie for years and decided if I was going to get a mtb it was going to be an e-bike.

 

[sparkydirty]

Fellow Haibike owner, pasting my post from noob section;

Anything with 2 wheels, am I right!?
Got a great deal recently on a Haibike Fullseven LT 4.0 with 50 miles on it, (220 now?).
Has the yamaha PW-SE, so far loving this thing.
Fits in the garage well with my trusty old Diamond Back XC bike, and my KTM 950 super enduro.?
Need to fab a bike rack for the 950 now!
Has the smart sam tire on it now, doing well and surprisingly fast rolling on pavement.
Front brake nose wheelies in the dirt as well, good stuff.
Ordered a set of Shwlabe Super moto X tires for some commuting.
Pondering deristriction and taller chainring than the 38, but i’ll leave that in the proper forum.???

Cheers to Rob for starting this forum, and for all the members/contributors.
Already getting good info and tips! ??

 

[steviedsolve]

AllMTN 8.0 2018 getting pretty lairy. I snapped my previous 2016 Full FatSix last year and Haibike couldn't get a replacement rocker so they sent me a brand new bike. They also loaned me a bike whilst I was deciding. That's what I call service.

 

[Keggie]

not the prettiest its a bit of a monster but I love it

 

[eebit]

View attachment 15524 not the prettiest its a bit of a monster but I love it

Great choice! I have the AllMtn version with PW-X and 160 fork and love it.

 

[HikerDave]

Tempe, AZ riding upgraded leftover Haibike SDURO Fullseven LT 4.0. Daily commuting and weekly trail riding.

 

[Fatyank]

For such a popular brand I thought we'd see more HaiBike owners here! Where are you?

I'm in Sandbach Cheshire, not been out on it yet, it's my first ebike..