2WHLFUN
Active member
I paired these bars with Wolftooth mega fat paw foam grips and it solved my hand and wrist pain.
What did you buy your ebike this week?
- Thread starter Simoto123
- Start date
SwampNut
Well-known member
I have the RevGrips floating grips, which are a monstrous improvement. I am thinking about getting these bars. I asked them if the Rev Grips present any problem but have not heard back.
I use Rev grips on one of my bikes with the E-bars with no issues. I’m trying out some different Ergons on my e-bike though, so far so good on the few rides I’ve been on.
Singletrackmind
Active member
Picked up an EST E-STORIA for my Spesh Kenevo to go along with a Push ELEVENSIX for the Yeti-160E! Once you go coil, there's no turning back!
You’ll end up swapping out the 11-6 on your other bike now
at least that’s what happened in my case. I had the 11-6 on my SB150 and my SB130, ordered the Storia for my SB130 just to try out and ended up replacing the 11-6 on both bikes.darwink1
Well-known member
The bigfoot got 27.5x4.5 Wrathchildren and matchy Oneup pedals.
Slymobi
E*POWAH Master
That looks fancy, definitely looks better than the one I use.
Slymobi
E*POWAH Master
Look forward to seeing your results
Hello, an excellent upgrade, I've had 1 almost 2 years no problems at all, I went through 3 e13,s in 3 months.
Have just put one on my wife's Rail (which I maintain, of course).
I bought my bike some Hope F20’s, I bought them from Wiggle, bought them yesterday afternoon but paid no extra for express delivery, they arrived before 12 noon today, I’d say that counts as fantastic service, well done Wiggle 
I got no sticker though
I got no sticker though 
RM.SGO
Member
Finally got a rear mud guard. Went with the Gen3 specific Levo Sicomtb. Fits great and made a huge difference this morning
RM.SGO
Member
Also picked up a pretty sweet bike stand for when you just need the rear wheel off the ground. Enduro Engineering out of Michigan. Great quality. Super convenient to not have to drag out the full size stand.
A lot of my mates have them and just to speed things up at the end of the ride when I borrow one of theirs with the pub calling ..got myself a Mobi v15 mobile pressure washer..
Who/What/Why/How etc?
Where you putting it, facing what, more questions, Etc.
Look forward to seeing the rsults, i like nerdy videos.
RM.SGO
Member
Replacing my Deity Copperhead with the new Hope Gravity stem. Finishing work is incredible. Love the slightly lower luster raw look to match the brake levers. I am becoming obsessed with their CNC work… may become an expensive addiction!
I was looking at these, ended up with another I9 stem. They do look good though!
SwampNut
Well-known member
Picked up a Shockwiz tuner on eBay for almost half off retail, unused. I should be able to tweak my bikes, and friends' bikes, then put it on eBay for very little loss.
RM.SGO
Member
Have an I9 sitting on my desk. Put that in briefly but hate the shallow bolt heads. Rounded one off right away.
I rounded mine off swapping multiple bars, ended up replacing them with titanium bolts.
Singletrackmind
Active member
Bad-Latitude
Active member
I finally was tired enough of the overgrown trails around me that I decided to get some hand guards. I found these from SendHit and they seems pretty good so far. They came from Europe so it took like two weeks to get in but they were worth the wait.
Bad-Latitude
Active member
That looks amazing. I love when companies don’t polish out the machines cutter path.
I know i'm in the minority, but I hate the "hope" I can't be bothered to finish it properly look?
I've always refered to them as tractor parts.
Hello, it's been an expensive week, new seatpost, bike yoke revive 213mm dropped to 203mm by the nice folk at tf tuned, for something that just goes up n down, this is by far the smoothest I've had. Also another new rear xt mech, 2x 12spd cassettes 1 for each set of wheels, and a new chain. Also got a new motor, but that was free!
New Tech 4 E4 brakes , got a cracking deal
for brand new in the bag ones on pinkbike
easy swap as I already had tech 3's so just used original hoses , I did need to bleed them though 
for brand new in the bag ones on pinkbike
easy swap as I already had tech 3's so just used original hoses , I did need to bleed them though
SwampNut
Well-known member
I know i'm in the minority, but I hate the "hope" I can't be bothered to finish it properly look?
I've always refered to them as tractor parts.
Same. And their brake kits look like stuff I made in high school.
I got and installed a very heavy duty phone mount with charger, now need to get it wired up to the battery. I like using mapping sometimes, and it eats battery. My previous holder didn't have power, and was one of those soft cases with a cover, which was a pain. This mount is unfortunately heavy, but super solid and secure. And with machine parts that don't look like I made them myself, LOL.
A Kiox upgrade to my Bosch Purion display as (a) provides useful data on power used, (b) allows for simple navigation and (c) because my Purion is knacked and the display doesn't work ! I don't fancy being out for a ride not knowing how much battery is left !
Lezyne HP Drive V2 Hand Pump (small, 170mm) which fits into my 200mm top tube frame bag.
Similar threads
EMTB Forums
Latest articles
-
Introducing the Forestal e-Cygnus - a downcountry and XC emtb
The new Forestal e-Cygnus is a slightly unusual emtb. It comes in two... -
2025 M1 Sporttechnik EN 8.0 review
The M1 EN is one of four M1 models built on the same frame. Well, it’s...