Levo Gen 2 THUMB MODE CONTROL + STOPPED WORKING after reboot

[SNEEZE]

For no reason the thumb mode controller has stopped working any suggestions on how to fix?

 

[salko]

Check connector at TCU side, maybe it fell off the socket ...

 

[SNEEZE]

Thanks, will start with that.

 

[SNEEZE]

Thanks, will start with that.

After checking for connection, plug is fine. So I saw online how to reboot system which I was able to do.
It fixed some issues, but now have the following issue:

Turbo button works
Down button works
Up button not working

I also found this:

• "S" Button (top): (Note that this is not the same as the S button on the TCU, which cycles through the three assist modes)
  • Tap: Selects Turbo mode regardless of what mode the bike is in.
  • 2s long press: Selects No Assist mode regardless of what mode the bike is in.
• "+" Button (top, facing rider): Selects modes with more assist
• "-" Button (bottom, facing rider): Selects modes with less assist
• "Foot" Button (bottom of unit): Selects Walk Assist. Hold down to maintain motor operation at about 2-3 mph.

Having the bike upside down I wonder if the "S" Button (top) disabled all buttons and if so how do I reset?