SW- EN600-L Bluetooth E-tube connection how to?

[Elcapitano]

Hi all,

Just got into the hobby and loving it. Recently bought a Merida e160-700.

Can anyone tell me if I can connect to the setup via bluetooth / etube app? I was under the impression that I could but cannot, for the life of me, figure it out.

Motor is an ep6, display is SC-EN600 and switch / controller is SW-EN600-L.

There no options for bluetooth within the SC-EN600 like there is on the EM800 but are you able to connect via the SW-EN600-L some way?

I have tried the instructions but they are not helping!

 

[HandsomeDanNZ]

Turn on the bike. Open the app. It should start searching for a bike to connect to.
Once you’ve done that, you can see all the various stats, do updates of the firmware, alter the assistance etc. After changes are made, you’ll need to disconnect before the bike becomes active again.

 

[Elcapitano]

Turn on the bike. Open the app. It should start searching for a bike to connect to.
Once you’ve done that, you can see all the various stats, do updates of the firmware, alter the assistance etc. After changes are made, you’ll need to disconnect before the bike becomes active again.

Tried that but it never finds the bike.

 

[HandsomeDanNZ]

Tried that but it never finds the bike.

Weird. I haven’t had an issue - iPhone 14 Pro and Merida e160 700 running the same hardware as yours.

 

[Bndit]

Tried that but it never finds the bike.

Open the app first and immediately after that turn the bike on. If your bike is on before you open app, it`s not gonna find it. At least this works for me. Seems that there`s narrow window when bike is visible by bluetooth…

 

[Elcapitano]

Open the app first and immediately after that turn the bike on. If your bike is on before you open app, it`s not gonna find it. At least this works for me. Seems that there`s narrow window when bike is visible by bluetooth…

Ah ok, i’ll try that. I’ve not been doing it like this.

 

[Astro66]

When both the App is open and the bike is on. Press the up or down button on the SW-EN600-L. The App will then find the bike.

 

[Bndit]

When both the App is open and the bike is on. Press the up or down button on the SW-EN600-L. The App will then find the bike.

Have to test this, thanks!

 

[Elcapitano]

Open the app first and immediately after that turn the bike on. If your bike is on before you open app, it`s not gonna find it. At least this works for me. Seems that there`s narrow window when bike is visible by bluetooth…

This worked for me. Didnt have to push any buttons on the controller.

Thanks for the help!

 

[Astro66]

This worked for me. Didnt have to push any buttons on the controller.

Yes. But if ever if the bike is on before you open the App on your phone. You can open and connect the App by just pushing a button on the SW-EN600-L , after the App has opened. It won't connect unless you do. It prevents just anyone connecting to your bike and tampering with your settings.

 

[Bndit]

Yes. But if ever if the bike is on before you open the App on your phone. You can open and connect the App by just pushing a button on the SW-EN600-L , after the App has opened. It won't connect unless you do. It prevents just anyone connecting to your bike and tampering with your settings.

Thanks for this, tried it today and works.