Found the answer in the user manual. There is a Y-split cable which connects to the TCU (part# S196800022). 12V 8W output.
Levo SL Gen 1 Official Levo SL Thread
- Thread starter Rob Rides EMTB
- Start date
-
- Tags
- levo sl
Kpmnd85
Member
Went for that ride in the mud with the DHRii 2.6" (aka 2.44"). Wife asked why I was going for a ride in the rain
. Some mud and puddles. I have ridden in muddier. Here is a picture during the ride with it as clogged as I could get it. But in the picture you see a plastic guard. When I got back I looked at my S-Works Stumpjumper.Here is picture of S-Works Stumpjumper...
One thing you notice is no plastic guard.
It would be interesting to hear from the Specialized engineers on why they added this piece of plastic to the Levo SL. It is ramped. Is that to encourage debris to fall as opposed to stack on the arm? The plastic itself hangs over just a bit and would flex if a rock lodged between it and the tire, being sacrificial instead of the frame.
I went back and the tire height from bottom of rim to top of tire and compared it to the Eliminator. The DHRii is taller by 6/100 of an inch. At this point, I'm thinking the DHRii is not going to be much more of an issue than the original Eliminator. I'm also thinking that the DHRii gave less width than I was hoping for, but it also didn't bring too much additional tightness between it and the frame. If Maxxis had a 2.8 (aka 2.6") that got wider but not taller, it would have been what I was looking for.
I look forward to riding it in better weather. Living in Austin, TX, hot and dry is more the norm.
I was originally drawn in to buying an ebike by the Levo. I rode and liked the ride and even had a deposit down. However I then tried an Orange eMTB (64 degree head angle, longer reach, 27.5”, shorter CS) and the bike felt so much better to me. Some of this was that a Levo medium is smaller than an Orange medium and I didn’t get chance to try the large, however you might have a point for some people there.
Edit: I do think some of the discussion on geo is dependent on how big you are. At 5’9” I can size up to an extent but any bigger and that becomes more difficult.
Last edited:
miPbiP
E*POWAH Master
It's to stop crud getting down into the motor compartment. Not necessary on the Stumpy obv.
So I got mine today, been playing around with settings and getting it all comfy for me.
One thing I noticed was the Alloys seattube is about 1/2cm deeper - I'm now right on the limit of stand over with the saddle on the carbon with it slammed as far as I will go without it hitting the frame.
I gave it a quick and dirty weigh (me on the scales with it, and then removed my weight)
Medium Carbon Comp - with tubes and no pedals - 18.3KG
Few people have asked about the Cast Berry Colour- and here is the best pic I was able to get:
Its a nightmare to photo, but in the shadows its a very dark nearly black purple, and the light really makes it pop, and its sorta metallic too - certainly a pain job that photos can't do it justice.
One thing I noticed was the Alloys seattube is about 1/2cm deeper - I'm now right on the limit of stand over with the saddle on the carbon with it slammed as far as I will go without it hitting the frame.
I gave it a quick and dirty weigh (me on the scales with it, and then removed my weight)
Medium Carbon Comp - with tubes and no pedals - 18.3KG
Few people have asked about the Cast Berry Colour- and here is the best pic I was able to get:
Its a nightmare to photo, but in the shadows its a very dark nearly black purple, and the light really makes it pop, and its sorta metallic too - certainly a pain job that photos can't do it justice.
Last edited:
Rob, did you remove the bar controls?
Doesn’t everyone do this to any pre-built bike? I always have to make it ‘mine’.
Specialized, like brands in other industries (cough, Apple, cough) have established their brand to the point their customers value the package of unique design, product presentation, support etc that they provide. Like discussions of why people choose Apple when one can buy an alternative they just go around in circles. Like this one. I’m amazed there are people still raising this!
I personally don’t have a Specialized bike, I chose one of the many alternatives. Why don’t you?
Vin829
Member
Out of curiosity what is the warranty on these new motors and batteries? Forgot to ask
You should probably have to admit that all this is all a bit ‘first world problems’. ?
2 Years iirc.
Peter Hill
Active member
Don’t you think for £10000 we can expect the ‘world’ ? It’s a hell of lot for a bicycle !
Well don’t buy one - and stop going on about how you don’t want one. Every post you put in this thread is about how your Levo is better. I suggest you don’t bother buying one!
Come on man this is a luxury bike and we’re all very privileged to afford any kind of ebike at all in the grand scheme of things. It is not a human right.
losgatosgtr
Well-known member
People customize almost everything cars, homes, skin, breasts...so why not bikes.
Problem with all bikes, no matter what the spec, is they will come with one that is trying to be all things to all people.
If I look at an S-Works for example, if I was speccing it I would have full Shimano drivetrain and brakes, with RS Suspension front and rear and the AXS dropper. This what I would use on my own high end build. This means the s-works is of no interest to me as I would want o bin most of the components, so if I was looking at a Levo I would go with comp models and upgrade to my tastes.
If I look at an S-Works for example, if I was speccing it I would have full Shimano drivetrain and brakes, with RS Suspension front and rear and the AXS dropper. This what I would use on my own high end build. This means the s-works is of no interest to me as I would want o bin most of the components, so if I was looking at a Levo I would go with comp models and upgrade to my tastes.
Totally agree... It all comes down to personal preference.
Whether I’d bought the S-Works Levo, or S-Works SL, there are things I’d want to change on them.
I’d prefer RockShox too... and personally I’d be putting Eagle AXS on mine.
So f I’d bought the £10000 top of the range Levo, or £11000 SL... I’d still probably end up spending a couple of £1000 getting it right for me.
It made much more sense to get a good discount on a lower spec model, and spend a bit speccing it up. It’ll work out much cheaper than the S-Works, and have all the things “I” want on it.
Hello guys,
I'm Gerry from Belgium and I ordered my Levo SL last week after seeing Rob's review and reading this forum. On the web I have viewed and read all possible reviews before I have made a decision. And the decision was made after I accidentally ended up at another dealer than the one I normally order.
He already had an SL and offered to ride on the street in front of the store. After this test drive it was quickly decided and I ordered the SL.
He will be delivered next week. So I'm in happy expectation.
I now have a Levo and I never really get out of eco, no matter how difficult or how steep it is. The most important thing for me is that I still have to work on the bike and then the SL is perfect for me in that case.
If the SL is in my possession, I will certainly post some photos.
Cheers
I'm Gerry from Belgium and I ordered my Levo SL last week after seeing Rob's review and reading this forum. On the web I have viewed and read all possible reviews before I have made a decision. And the decision was made after I accidentally ended up at another dealer than the one I normally order.
He already had an SL and offered to ride on the street in front of the store. After this test drive it was quickly decided and I ordered the SL.
He will be delivered next week. So I'm in happy expectation.
I now have a Levo and I never really get out of eco, no matter how difficult or how steep it is. The most important thing for me is that I still have to work on the bike and then the SL is perfect for me in that case.
If the SL is in my possession, I will certainly post some photos.
Cheers
you can a pivot mach 4 in like 25 different specs including 3 frame only options, i would also get the all xtr build , stumpjumper has a bunch of options as well so if one were interested in those classes of bike you could probably find something close . Perhaps as ebikes gain market there will be better options
Went out for a ride and realized the aluminum bike does come with the mud guard at the rear pivot point. Is this just because it’s less risk to the frame?
Hard to tell with the mud, but you can see the difference in the pictures on specialized website as well between the carbon and the aluminum.
Hard to tell with the mud, but you can see the difference in the pictures on specialized website as well between the carbon and the aluminum.
You´re welcome.
I´m sure you made the right decision!
ridesantacruz
Member
I would like someone to make a mud guard for the Levo SL. I have one on my Levo and I would like one for my Levo SL. No bueno!
miPbiP
E*POWAH Master
Looking forwards to your pics and ride reports Gerry.
without taking mine off all hints say PG non XD hub - I dont know if they do a new freehub that would be compatible tho.
You would need a new freehub body or a new hub yes. The NX cassette is built around the old shimano freehub standard as an easy way to upgrade to 12 speed. Here's a link to a freehub - Specialized Roval 11SPD XD Freehub | WHEEL SPARES AND ACCESSORIES | Evans Cycles
Check with your LBS to see if that would fit, as I know all Roval Hubs are not the same.
A little bit more weigh reduction tonight.
Rear wheel is now tubeless. I’ve ordered a new front tyre, so I’m not making it tubeless until I’m fitting that one. Too much mess for the sake of a few days!
I also cut off the really annoying plastic guard at the back of the cassette. After 1 ride it’ll be misaligned and look stupid. A whopping 31g for that bit of plastic alone!!
Added my pedals and tuned the XX1 AXS, so I’m now ready for my maiden voyage!
With tube:
Without tube and plastic guard:
Tubes are pretty heavy:
Plastic guard - hacked off with large pliers!
DMR Vault MG pedals:
Rear wheel is now tubeless. I’ve ordered a new front tyre, so I’m not making it tubeless until I’m fitting that one. Too much mess for the sake of a few days!
I also cut off the really annoying plastic guard at the back of the cassette. After 1 ride it’ll be misaligned and look stupid. A whopping 31g for that bit of plastic alone!!
Added my pedals and tuned the XX1 AXS, so I’m now ready for my maiden voyage!
With tube:
Without tube and plastic guard:
Tubes are pretty heavy:
Plastic guard - hacked off with large pliers!
DMR Vault MG pedals:
Bencab
Well-known member
Just picked it up today. 36.99 lbs ready to ride.
Apart from the obvious visual changes, New RS Pike and SRAM Eagle, pedals.... what other mods do you do to get the weight down? What is the wheelset? What are the brakes? Hard to tell with the low res photos
36.99lbs (16.77kgs) is impressive
Similar threads
EMTB Forums
Latest articles
-
Santa Cruz Vala X0 review - a new approach to perfection?
The new Vala is Santa Cruz’ first attempt on a Bosch-powered emtb. Like...- Knut Nes
- 6 min read
- Views: 2K
- Reaction score: 5
- Comments: 8
-
A new standard for charging ebikes is coming? A quick interview with Bosch - charge2bike
I had a quick chat with dr Vikram Godbole about "charge2bike", a new...- Knut Nes
- 2 min read
- Views: 1K
- Reaction score: 7
- Comments: 5