My Motor WORKS ! - Survey

[Zimmerframe]

There's so many poles for broken motors .. here's one to see how many are out there which work.

I've allowed upto three votes for people with several bikes.

Unfortunately, it won't let you vote twice for the same one - if you have two bosch bikes for instance.

 

[Astom22]

2020 YT Decoy should turn over 1800 miles today or tomorrow. Been riding since January.

 

[arawa]

2015 Yamaha on Haibike Hardseven. Faultless despite being worked hard.

 

[arawa]

TQ on 2019 Haibike Alltrail 6.0. Motor has been excellent but originally let down by input control issues (now resolved). Awesome power.

 

[Beezerk]

I cant see any Poles at all ?

 

[Nicho]

There's so many poles for broken motors .. here's one to see how many are out there which work.

Lots of Poles come to the UK to work, but I haven't heard of any with broken motors.

 

[flash]

2 E8000 motors and a Fazua. No problems.

First E8000 is 2 years and riding 1-2 days each week.
Second E8000 has maybe 50 hours of riding.
Fazua has about 200 hours of riding. Hasn't been out much due to pandemic as I've been on the MTB more.

Gordon

 

[steve_sordy]

Shimano E8000 1700 miles, two UK winters, zero problems.

Edit: I hope you will take into account the number of each motor on the market, otherwise he results will be less useful.

 

[wepn]

I have a few that have never had an issue, Clyte 5304, Clyte TC100, Bafang BPM, MAC 10T but most notably, a Brose 1.3.

I wonder if the Brose 1.3 (Alu S) has a lower failure rate than the Brose 2.1 (Mag S).?

It seems to me that hub motors have a lower failure rate than mid-motors. The Clyte 5304 I have is 11 years old & has done far higher mileage than any car I've owned.

 

[Dirtnvert]

1700km on my e8000 and somethings up. I think the swingarm stretched the speed sensor wire. Shimano canada has no speed sensors in stock so order one from the US. I wont be expecting that overnight in this current shiping climate. Good thing the lift fired up a couple days later. Running gondi laps until the speed sensor comes and/or i get an acoustic bike(also out of stock) to not be stuck without something. Fingers crossed its the speed sensor wire. Im kind of hooked now

 

[Andy__C]

If this curses my bike..... !

2019 levo expert... purchased in April20. 700km so far.

 

[simonk]

Yamaha and Mahle

 

[ggx]

2 bikes in the house. Both Bosch . 2000Km (gen3) and 1000Km (gen4). No prob until now.

 

[MrBrownstone]

E8000 BMC speedfox AMP 2256 miles and going strong.

 

[Peko]

Brose C161: 6000km
Brose SMag: 1900km
Brose SMag: 1000km

All motors still do their job without any issue

 

[Binhill1]

There's so many poles for broken motors .. here's one to see how many are out there which work.

I've allowed upto three votes for people with several bikes.

Unfortunately, it won't let you vote twice for the same one - if you have two bosch bikes for instance.

Have to backdate mine till last Thursday expert 2600 miles all ok .

 

[GrahamPaul]

Bosch Gen 4 2020 currently with 3000kms. Delivered in January, just in time for 7 weeks of total lockdown...

 

[Intermtb]

Shimano E7000, 1800 miles trouble free.
I'm in Socal, we don't get wet like UK folks. probably that's why my motor still last.

 

[iXi]

Shimano E8000 4700kms and still going. First died after 1750kma but this one's been great.

 

[Levo-Lon]

850miles 2019 Levo 8mth old
Faultless

 

[Gary]

ALL of mine have worked

 

[Shy Ted]

1300 mostly seriously off road miles on shimano E8000 - no problems.
450 miles -as above - Bosch 4th gen no problems......unless you count the left side cosmetic cover falling off?
450 miles on Bosch driven road bike no problems.

 

[Gary]

It seems to me that hub motors have a lower failure rate than mid-motors.

No one in their right mind would choose a hub motor for actual mountainbiking

 

[Zimmerframe]

No one in their right mind would choose a hub motor for actual mountainbiking

I did !

Ah yes... I see what you mean .. ???

 

[Gravityhurts]

E7000 on a Maxmax currently at 500km urban riding.

 

[brizi2003]

There's so many poles for broken motors .. here's one to see how many are out there which work.

I've allowed upto three votes for people with several bikes.

Unfortunately, it won't let you vote twice for the same one - if you have two bosch bikes for instance.

Mmmmm not sure what this is going to tell you if you don't know the total number of each type on the forum? Where are the broken motor poles?

 

[brunomartins83]

I have a Bosch Performance Line CX Gen2 on a Bulls E-Six 50 EFS+3 with 2040km's and until now free of problems, only normal wear and tear components.

 

[brizi2003]

1250 trouble free miles with my 2nd Kenevo 2019 Brose motor (fingers crossed). 1st lasted 1100.

 

[downhilllister]

E8000 2500 KM no problems.But the bike throws me of when its had enough.

 

[peterk]

I have about 1000 km on a Yamaha SyncDrive Sport (Giant Stance) and despite multiple hits on rocks and logs, totally smashing the motor guard, the motor itself is fine.....maybe a little noisier than when new.