Maxxis Assegai DH casing

[WezDavo]

Recently bought a Mondraker Level and it came with Beastie DH tyres (Assegai DH Max grip front and rear)
I have ditched the rear in favour of a DHR2 Double Down but still run the Assegai up front....
Struggling to find a decent front pressure to be honest so wondering if anyone else runs it and what pressure....
I am just over 100kg...

 

[Weeksy]

Used to run 23 roughly.

 

[Mik3F]

I run around 22-24 PSI depending on what is being ridden with that tyre

 

[steve_sordy]

I am 95kg in my riding kit. I have 29x2.5 Assegai DH Maxx Grip on the front and use 17psi. If I'm intending to go somewhere particularly rocky, I will go +1 or +2 psi. When the pressure is that low, it's advisable to set the pressure when you get where you are going as it is surprising how much ambient temperature affects the pressure.
I did have a 29x2.5 Assegai DD Maxx Grip tyre on before the DH and the pressure requirement was the same.

Tubeless of course, no insert.

 

[irie]

Used to run 22 front 24 rear Assegai Maxxgrip DD.

Now High Roller 3 DD Maxxgrip front 22, High Roller 3 DH Maxxgrip rear 24.

Works on our terrain.

Edit: Trek Rail, 78kg ready to ride.

 

[RustyIron]

still run the Assegai up front....
Struggling to find a decent front pressure
I am just over 100kg...

I run an 2.5" WT EXO+ Assegai up front and tip the scales at 200 pounds.
23 psi works for me.

 

[The EMF]

I run an E Wild on the front 27.5x2.6 at 18psi, was 95kg ( before the festivities)
21psi in the E Wild on the rear. No issues with burping or pinch flats

 

[Kootbiker]

Assegai DD front 16 psi on my 57 lb. Rocky.