How to convert from Shimano micro spline to Sram xd ?

chrismechmaster

Well-known member
Subscriber
Dec 7, 2020
816
420
Newbury
How differcult is this to do ??

is it just a case of getting a sram xd driver and pulling the micro spline off and fitting a xd ???
 

salko

E*POWAH Elite World Champion
Aug 29, 2019
1,275
867
SLO
That depends on the rear hub you have, some have option to just swap the drivers.
What is a reason you want to change from MS to XD? XD is a weaker design - not all cassette cogs are engaged with splines ...
 

chrismechmaster

Well-known member
Subscriber
Dec 7, 2020
816
420
Newbury
Purely because I want to run a sram asx derailleur and have been told it won’t work with my shimano 12 speed cassette ????

I believe that’s correct not tried it tho ?
 

salko

E*POWAH Elite World Champion
Aug 29, 2019
1,275
867
SLO
Of course it would also work with Shimano 12spd cassette.
 

salko

E*POWAH Elite World Champion
Aug 29, 2019
1,275
867
SLO
I saw many posts on this and other forums that folks are running Sram (mechanical) deraileurs on Shimano cassettes and have no issues, so with AXS it should be no different ...
 

mark.ai

E*POWAH Master
Patreon
Jul 10, 2018
828
594
Windermere
I guess it is the easiest and cheapest change to try :) Hopefully it all works, and there is a fallback if it doesn't.

Any possible downsides - I assume not quite as good shifting as with a Shimano derailleur? Possibly more wear on chain or cassette as alignment may be very slightly different? (No idea!)
 

salko

E*POWAH Elite World Champion
Aug 29, 2019
1,275
867
SLO
Left B screw as it was, shifting is fine, slightly noisier but am still on sram chain
If you wish to use advantage of HG+ technology you must use a cassette, chain and chainring which are supporting HG+ ...
 

Rosemount

E*POWAH Elite
May 23, 2020
822
1,748
Qld Australia
Shimano chain on a Shimano cassette will change gears more smoothly under load .
They have an edge on the chain that meshes with the cut outs in the cassette . Other chains work . Just not as well .
 

chrismechmaster

Well-known member
Subscriber
Dec 7, 2020
816
420
Newbury
Just a update
Fitted the gx asx last night

shifter and derailleur sram gx asx
chain and cassette shimano 12 speed

I needed to take 4 links out of the chain , adjust the b gap and that was it perfect shifting I would say no differencein shifting compared to myother bike that’s a ALL sram set up
 

EMTB Forums

Since 2018

The World's largest electric mountain bike community.

555K
Messages
28,046
Members
Join Our Community

Latest articles


Top