-
Warning!!
Riding a tuned or deristricted EMTB is not a trivial offence and can have serious legal consequences. Also, many manufacturers can detect the use of a tuning device or deristricting method and may decline a repair under warranty if it was modified from the intended original specification. Deristricting EMTB's can also add increased loads for motors and batteries. Riding above the local law limit may reclassify the bike as a low-powered bike, requiring insurance, registration and a number plate.
Be aware of your local country laws. Many laws prohibit use of modified EMTB's. It is your responsibility to check local laws. Ignoring it, has potential implications to trail access, and risk of prosecution in the event of an accident.
We advise members great caution. EMTB Forums accepts no liability for any content or advice given here.
Ep801 & stunlocker
- Thread starter texano999
- Start date
- Thread starter
- #3
Connection with ep801 tested on new orbea rise 2023 yesterday system is connected and display data on the app unstlocker.
App not update to the new feature E-TUBE 15 level of assistance and it is still on 10 ( screenshot highlight it). Still not tested the possibilità to move from Rs to full power motor.
App not update to the new feature E-TUBE 15 level of assistance and it is still on 10 ( screenshot highlight it). Still not tested the possibilità to move from Rs to full power motor.
Last edited:
To my knowledge, there was another thread some days ago about this.
As I remember, you need the cable to do it seccesfully.
As I remember, you need the cable to do it seccesfully.
Frankyspec
Member
Congrats with the new bike, how is it doing, the XT DI2?Did you get the 360W or 540W?
Maybe a new topic, to share your first impressions , range, and pictures?
I’m still waiting on a delivery date…
Maybe a new topic, to share your first impressions , range, and pictures?
I’m still waiting on a delivery date…
- Thread starter
- #6
Delivery first week of April…we tested a m10…m-team still not deliveredCongrats with the new bike, how is it doing, the XT DI2?Did you get the 360W or 540W?
Maybe a new topic, to share your first impressions , range, and pictures?
I’m still waiting on a delivery date…
- Thread starter
- #7
Depend what you want to do
alekseypav
Member
As I understand it, the application switches the motor mode, cool. I thought the process was hard.
Frankyspec
Member
And already the proud owner of the m team? Some experiences?
- Thread starter
- #11
Vendor has propose to me the orbea rise Ltd 2023 instead m-team and i will have next week!!!customization needed !!!
- Thread starter
- #14
PCE02 + minimax for ep801
Since the speed limit is still not possible to change via software (I only need to change to US-region), I have worked with the developer of Planet3 to get a working device on the Orbea Rise 2023 H20 with the 801 motor.
The unit changes the speed with factor 1.5 (normally factor 3) and it's actually working.....first run was yesterday and it worked flawlessly.
The only downside is my Garmin logger (Edge 1040) is recording the distance and speed with factor 1.5 lower than the actual speed/distance.....but the run-time is the unit I care about.
I used approx 2-3% more battery, but that was not a problem.
The flow is so much more fun to ride....I'm happy.
The unit changes the speed with factor 1.5 (normally factor 3) and it's actually working.....first run was yesterday and it worked flawlessly.
The only downside is my Garmin logger (Edge 1040) is recording the distance and speed with factor 1.5 lower than the actual speed/distance.....but the run-time is the unit I care about.
I used approx 2-3% more battery, but that was not a problem.
The flow is so much more fun to ride....I'm happy.
- Thread starter
- #19
For ep801 when i try to change the power limit moving from rs to full power this does not change and go back to the oroginale configuration rs
I am not using any additional licenze Just the app.
Do i need the PCE02 modulo and labtop Windows connection?
I use windows version of STunlocker with a license. I connect to the bike at the EW-E100 junction using the PCE02 module. This method avoids all of the firmware issues when using only BT. I am able to customize the "Power and Torque" settings in the screen shot in my previous post, I don't think this is possible using only a BT connection. My question for anyone that might know is will this work on the EP801rs as well on 2023 model Rise? Works perfectly on my 2021 EP8.
I connect as shown below to bike, this is an extra EW-100 I have just for an example
I connect as shown below to bike, this is an extra EW-100 I have just for an example
- Thread starter
- #21
As far as i know does not work for ep801 … i will test it ne t week anyway… instead minimax With pce02 should work
- Thread starter
- #23
You need to install minimax software in your pc
Home EN – eMax Tuning
www.emax-tuning.com
You can tune your rs motor for free
What about speed? Any movement on that yet?
And Region change from 25kmh to 32 kmh ?
It’s still saying unsupported on the website. You think they would be advertising the fact they can alter top speed on an ep801?!
Ok so it’s not in the app yet. Hopefully soon.
EMTB Forums
Latest articles
-
Introducing the Forestal e-Cygnus - a downcountry and XC emtb
The new Forestal e-Cygnus is a slightly unusual emtb. It comes in two... -
2025 M1 Sporttechnik EN 8.0 review
The M1 EN is one of four M1 models built on the same frame. Well, it’s...