Unanswered Centrelock rotors

[hainman]

So I’ve been using the Magura storm CL rotors but bent the rear and wondered if there was anything else in 2mm thickness that I could run
Or safe to run centrelock to 6 bolt adapters
Also is the TRP 2.3mm rotor too thick for the Magura calipers

 

[VWsurfbum]

the 0.3 of an mm won't make a difference.
Personally, I don't like centre lock or the adapters, find you get too much movement?
Can you not get actual centre-lock discs to do away with the adapters?

 

[hainman]

I would need to buy new wheels or hubs which is way to expensive

 

[Shjay]

Galfer don’t do 2.3mm it’s Hope! Their 1.8 or 2mm up to 223mm

 

[hainman]

Galfer don’t do 2.3mm it’s Hope! Their 1.8 or 2mm up to 223mm

Sorry your tight
Think it was TRP I was thinking about

 

[VWsurfbum]

I would need to buy new wheels or hubs which is way to expensive

So why dont you use the 6 bolt type?

am I being thick? (more than possible)

 

[hainman]

So why dont you use the 6 bolt type?

am I being thick? (more than possible)

Because my wheels are centrelock and I’m not paying out stupid money on new wheels
Hense me asking if 6 bolt adapters are ok
The centrelock ones I have one is bent and they’re hard to come by

 

[VWsurfbum]

Yes they are fine but you do get additional movement that most people wouldn't notice. (I do as I'm a bit like that, I don't like Shimano brakes either for their pad movement)

 

[hainman]

I had Shimano XT but swapped them
Out for Magura MT5 Fabio wibmer ed with single finger levers
Great when they work
Bastard when they don’t,They hold air really badly

 

[RustyMTB]

Adapters give movement in the rotors which you will notice when stationary. Some people don't mind. I hated it.

 

[Jaspy]

Old post but… pic says it all so depending on what size your rotors are (I would guess 203) you maybe outta luck for the back max size is 160mm.
I do have these new if interested let me know.cheers