Are SRAM GX Eagle E-MTB Cranks for Bosch gen4 self extracting?

[Alfmeister]

Hi,
friend has SRAM AXS on his bike and didn’t know if the SRAM GX Eagle E-MTB Cranks for Bosch gen4 are self extracting, anybody know please?
Many thanks.

 

[Mikerb]

no not self extracting

 

[Alfmeister]

It seems that they are self extracting after all. Friend just let me know, that he was able to use the inner 8mm Allen bolt, to screw out against the outer 22mm cap, and the crank extracted itself!

 

[Stihldog]

As far as i know the cranks are not self extracting on the Bosch gen4 CX motor. What model of cranks is your friend using?

There is a decent thread on the pros and cons of crank installation.

Bosch gen 4 crank arm fell off my mondraker crafty r.

hi all. Tried a search but nothing concrete. Pedalling on flat half way through a 25 mile route the race face crank fell off. Luckily the bolt was there as well and found a local house in the sticks with an 8mm key. My question is I thought these crank arms were meant to need some serious...

www.emtbforums.com

I use a certain method …a slight bit of grease on a very clean isis spindle. Torque to 50nm, install dust cap. If the cranks are coming loose …something is wrong …model, manufacturer, dirt, wear, tear, assembly, etc.