2020 Kenevo 220mm Hope Adapter

[Dpickin1]

I have just spent the last 45 min going through the forums before posting here and could not find the answer I am looking for.

I have a 2020 kenevo (180 boxxer) running Saint brakes. I am about to buy a Hope 220mm rotor and am completely confused as to which adapter to use. I think the shimano 180 PS adapter is the one but would appreciate if one of the forum experts could confirm.

Bonus question: what adapter do I need to run a 220mm rotor in the back (Saint brakes)

 

[CjP]

20mm adaptor for the front and 40mm for the rear.

 

[Dpickin1]

20mm adaptor for the front and 40mm for the rear.

Thanks for the reply, as I am running saint brakes do I need to use a Shimano adapter?

 

[salko]

No, any PM +20/+40mm adapter should fit fine.

 

[Dpickin1]

No, any PM +20/+40mm adapter should fit fine.

Thanks for that!

 

[salko]

One more thing: why do you consider 220mm rotor on rear wheel? IMHO 220 is way overkill for the rear wheel, 200 or even 180mm on the back should do the job just fine ...

 

[CjP]

Better heat control on long descents.

 

[Dpickin1]

One more thing: why do you consider 220mm rotor on rear wheel? IMHO 220 is way overkill for the rear wheel, 200 or even 180mm on the back should do the job just fine ...

I am a pretty heavy guy and even with Saints have yet to be totally satisfied with braking performance. Hoping that the 220s will do the trick.

 

[Spagnol]

I am a pretty heavy guy and even with Saints have yet to be totally satisfied with braking performance. Hoping that the 220s will do the trick.

I'm running magura's 220 front and rear with saints . Lots of modulation ( saints are really on/off on small rotors ) and heat dissipation is awesome ... go for it !!

In case you have some doubt about clearance ... In the rear there are more that 3 mm of clearance on the left side arm so you're completely fine ( the saint caliper have only 1,5 mm of lateral clearance ... so the caliper will always block the disk before hitting the arm in case of deformation)

 

[Dpickin1]

I'm running magura's 220 front and rear with saints . Lots of modulation ( saints are really on/off on small rotors ) and heat dissipation is awesome ... go for it !!

In case you have some doubt about clearance ... In the rear there are more that 3 mm of clearance on the left side arm so you're completely fine ( the saint caliper have only 1,5 mm of lateral clearance ... so the caliper will always block the disk before hitting the arm in case of deformation)

Nice!!!! Thats what I wanted to hear, appreciate the heads-up.

 

[Shane(NZ)]

Do you have a link for the hope 220 rotor?
I didn't realise hope did a 220mm I have a hope 225mm but thats on a trek powerfly. Use the std 200 on rear, I'm over 110kg the larger rotor does hold in there for longer.

 

[Dpickin1]

Do you have a link for the hope 220 rotor?
I didn't realise hope did a 220mm I have a hope 225mm but thats on a trek powerfly. Use the std 200 on rear, I'm over 110kg the larger rotor does hold in there for longer.

I purchased these from here Hope Floating Disc Rotor | Jenson USA