2020 140 race rear shock spec?

[mak]

Its the basic bike bottom of the range and comes with a basic rear shock, rebound adjustment only as far as damping's concerned. Could anyone give me the measurements and spec of this shock so I could get a replacement plug and play higher spec unit or even suggest another alternative.

 

[Jackware]

Is there no info on the shock? If it's a Rockshox it will show the size and tune on the back of the shock below the serial number. What does the website show?

 

[MrPeaski]

Shock = RockShox Deluxe Select, 185x55mm, Rebound Adjust, Trunnion Mount

Hardware = Top: 54mm Trunnion Mount, Bottom: 22.2x8mm

CUBE PRODUKT ARCHIV | 2020

CUBE PRODUKT ARCHIV

www.cube.eu

 

[mak]

Shock = RockShox Deluxe Select, 185x55mm, Rebound Adjust, Trunnion Mount

Hardware = Top: 54mm Trunnion Mount, Bottom: 22.2x8mm

CUBE PRODUKT ARCHIV | 2020

CUBE PRODUKT ARCHIV

www.cube.eu

Thanks, i did try and google it but i couldnt find all the spec, that should give me the info i need to replace it

 

[MrPeaski]

I keep a link to the 2020 160 AT that I have and also the 140 Race my mate has just in case I (or he) needs the stock info.

I think most Googled links now would be to the 2021 spec site

 

[Jackware]

Have a look at the shock and check what the tune of it is, as this will affect how the shock reacts to the terrain. Different bike suspensions have different leverage ratios and the bike manufacturers will match the shock's settings to the bike design.
If this means nothing to you, keep googling and check out Gary's excellent sticky posts in the General section.